Packages

  • package root
    Definition Classes
    root
  • package org
    Definition Classes
    root
  • package scalatest

    ScalaTest's main traits, classes, and other members, including members supporting ScalaTest's DSL for the Scala interpreter.

    ScalaTest's main traits, classes, and other members, including members supporting ScalaTest's DSL for the Scala interpreter.

    Definition Classes
    org
  • package compatible
    Definition Classes
    scalatest
  • package concurrent

    Classes, traits, and objects related to testing asynchronous and multi-threaded behavior.

    Classes, traits, and objects related to testing asynchronous and multi-threaded behavior.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package diagrams

    A single traits and companion object that provides a assertions that draw code diagrams on failure.

    A single traits and companion object that provides a assertions that draw code diagrams on failure.

    This package is released as the scalatest-diagrams module.

    Definition Classes
    scalatest
  • package enablers

    Classes, traits, and objects for typeclasses that enable ScalaTest's DSLs.

    Classes, traits, and objects for typeclasses that enable ScalaTest's DSLs.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package events

    Classes for events sent to the org.scalatest.Reporter to report the results of running tests.

    Classes for events sent to the org.scalatest.Reporter to report the results of running tests.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package exceptions

    Classes and traits for exceptions thrown by ScalaTest.

    Classes and traits for exceptions thrown by ScalaTest.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package featurespec

    Classes and traits for ScalaTest's FeatureSpec style.

    Classes and traits for ScalaTest's FeatureSpec style.

    This package is released as the scalatest-featurespec module.

    Definition Classes
    scalatest
  • package fixture

    Classes and traits supporting ScalaTest's "fixture" style traits, which allow you to pass fixture objects into tests.

    Classes and traits supporting ScalaTest's "fixture" style traits, which allow you to pass fixture objects into tests.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package flatspec

    Classes and traits for ScalaTest's FlatSpec style.

    Classes and traits for ScalaTest's FlatSpec style.

    This package is released as the scalatest-flatspec module.

    Definition Classes
    scalatest
  • package freespec

    Classes and traits for ScalaTest's FreeSpec style.

    Classes and traits for ScalaTest's FreeSpec style.

    This package is released as the scalatest-freespec module.

    Definition Classes
    scalatest
  • package funspec

    Classes and traits for ScalaTest's FunSpec style.

    Classes and traits for ScalaTest's FunSpec style.

    This package is released as the scalatest-funspec module.

    Definition Classes
    scalatest
  • package funsuite

    Classes and traits for ScalaTest's FunSuite style.

    Classes and traits for ScalaTest's FunSuite style.

    This package is released as the scalatest-funsuite module.

    Definition Classes
    scalatest
  • AnyFunSuite
  • AnyFunSuiteLike
  • AsyncFunSuite
  • AsyncFunSuiteLike
  • FixtureAnyFunSuite
  • FixtureAnyFunSuiteLike
  • FixtureAsyncFunSuite
  • FixtureAsyncFunSuiteLike
  • package matchers

    Classes and traits for matchers.

    Classes and traits for matchers.

    This package is released as part of the scalatest-matchers-core module.

    Definition Classes
    scalatest
  • package prop
    Definition Classes
    scalatest
  • package propspec

    Classes and traits for ScalaTest's PropSpec style.

    Classes and traits for ScalaTest's PropSpec style.

    This package is released as the scalatest-propspec module.

    Definition Classes
    scalatest
  • package refspec

    Classes and traits for ScalaTest's RefSpec style.

    Classes and traits for ScalaTest's RefSpec style.

    This package is released as the scalatest-refspec module.

    Definition Classes
    scalatest
  • package tagobjects

    Singleton-object versions of ScalaTest's built-in tags.

    Singleton-object versions of ScalaTest's built-in tags.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package tags
    Definition Classes
    scalatest
  • package time

    Classes, traits, and objects for ScalaTest's time DSL.

    Classes, traits, and objects for ScalaTest's time DSL.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package tools

    Tools for running ScalaTest.

    Tools for running ScalaTest.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package verbs

    Classes and traits that support ScalaTest DSLs.

    Classes and traits that support ScalaTest DSLs.

    This package is released as part of the scalatest-core module.

    Definition Classes
    scalatest
  • package wordspec

    Classes and traits for ScalaTest's WordSpec style.

    Classes and traits for ScalaTest's WordSpec style.

    This package is released as the scalatest-wordspec module.

    Definition Classes
    scalatest
p

org.scalatest

funsuite

package funsuite

Classes and traits for ScalaTest's FunSuite style.

This package is released as the scalatest-funsuite module.

Source
package.scala
Linear Supertypes
AnyRef, Any

Type Members

  1. class AnyFunSuite extends AnyFunSuiteLike

    A suite of tests in which each test is represented as a function value.

    A suite of tests in which each test is represented as a function value. The “Fun” in AnyFunSuite stands for “function.”

    Recommended Usage: For teams coming from xUnit, AnyFunSuite feels comfortable and familiar while still giving some benefits of BDD: AnyFunSuite makes it easy to write descriptive test names, natural to write focused tests, and generates specification-like output that can facilitate communication among stakeholders.

    Here's an example AnyFunSuite:

    package org.scalatest.examples.funsuite
    
    import org.scalatest.funsuite.AnyFunSuite
    class SetSuite extends AnyFunSuite {
    test("An empty Set should have size 0") { assert(Set.empty.size === 0) }
    test("Invoking head on an empty Set should produce NoSuchElementException") { assertThrows[NoSuchElementException] { Set.empty.head } } }

    test” is a method, defined in AnyFunSuite, which will be invoked by the primary constructor of SetSuite. You specify the name of the test as a string between the parentheses, and the test code itself between curly braces. The test code is a function passed as a by-name parameter to test, which registers it for later execution.

    An AnyFunSuite's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

    Tests can only be registered with the test method while the AnyFunSuite is in its registration phase. Any attempt to register a test after the AnyFunSuite has entered its ready phase, i.e., after run has been invoked on the AnyFunSuite, will be met with a thrown TestRegistrationClosedException. The recommended style of using AnyFunSuite is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

    Note: AnyFunSuite was in part inspired by Rehersal, an early test framework for Scala.

    Ignored tests

    To support the common use case of temporarily disabling a test, with the good intention of resurrecting the test at a later time, AnyFunSuite provides registration methods that start with ignore instead of test. Here's an example:

    package org.scalatest.examples.funsuite.ignore
    
    import org.scalatest.funsuite.AnyFunSuite
    class SetSuite extends AnyFunSuite {
    ignore("An empty Set should have size 0") { assert(Set.empty.size === 0) }
    test("Invoking head on an empty Set should produce NoSuchElementException") { assertThrows[NoSuchElementException] { Set.empty.head } } }

    If you run this version of SetSuite with:

    scala> org.scalatest.run(new SetSuite)
    

    It will run only the second test and report that the first test was ignored:

    SetSuite:
    - An empty Set should have size 0 !!! IGNORED !!!
    - Invoking head on an empty Set should produce NoSuchElementException
    

    If you wish to temporarily ignore an entire suite of tests, you can (on the JVM, not Scala.js) annotate the test class with @Ignore, like this:

    package org.scalatest.examples.funsuite.ignoreall
    
    import org.scalatest.funsuite.AnyFunSuite import org.scalatest.Ignore
    @Ignore class SetSuite extends AnyFunSuite {
    test("An empty Set should have size 0") { assert(Set.empty.size === 0) }
    test("Invoking head on an empty Set should produce NoSuchElementException") { assertThrows[NoSuchElementException] { Set.empty.head } } }

    When you mark a test class with a tag annotation, ScalaTest will mark each test defined in that class with that tag. Thus, marking the SetSuite in the above example with the @Ignore tag annotation means that both tests in the class will be ignored. If you run the above SetSuite in the Scala interpreter, you'll see:

    scala> org.scalatest.run(new SetSuite)
    SetSuite:
    - An empty Set should have size 0 !!! IGNORED !!!
    - Invoking head on an empty Set should produce NoSuchElementException !!! IGNORED !!!
    

    Note that marking a test class as ignored won't prevent it from being discovered by ScalaTest. Ignored classes will be discovered and run, and all their tests will be reported as ignored. This is intended to keep the ignored class visible, to encourage the developers to eventually fix and “un-ignore” it. If you want to prevent a class from being discovered at all (on the JVM, not Scala.js), use the DoNotDiscover annotation instead.

    Informers

    One of the parameters to AnyFunSuite's run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by AnyFunSuite's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event. Here's an example that shows both a direct use as well as an indirect use through the methods of GivenWhenThen:

    package org.scalatest.examples.funsuite.info
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AnyFunSuite with GivenWhenThen {
    test("An element can be added to an empty mutable Set") {
    Given("an empty mutable Set") val set = mutable.Set.empty[String]
    When("an element is added") set += "clarity"
    Then("the Set should have size 1") assert(set.size === 1)
    And("the Set should contain the added element") assert(set.contains("clarity"))
    info("That's all folks!") } }

    If you run this AnyFunSuite from the interpreter, you will see the following output:

    scala> org.scalatest.run(new SetSuite)
    SetSuite:
    - an element can be added to an empty mutable Set
      + Given an empty mutable Set
      + When an element is added
      + Then the Set should have size 1
      + And the Set should contain the added element
      + That's all folks!
    

    Documenters

    AnyFunSuite also provides a markup method that returns a Documenter, which allows you to send to the Reporter text formatted in Markdown syntax. You can pass the extra information to the Documenter via its apply method. The Documenter will then pass the information to the Reporter via an MarkupProvided event.

    Here's an example AnyFunSuite that uses markup:

    package org.scalatest.examples.funsuite.markup
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AnyFunSuite with GivenWhenThen {
    markup { """ Mutable Set ———-- A set is a collection that contains no duplicate elements. To implement a concrete mutable set, you need to provide implementations of the following methods: def contains(elem: A): Boolean def iterator: Iterator[A] def += (elem: A): this.type def -= (elem: A): this.type If you wish that methods like `take`, `drop`, `filter` return the same kind of set, you should also override: def empty: This It is also good idea to override methods `foreach` and `size` for efficiency. """ }
    test("An element can be added to an empty mutable Set") {
    Given("an empty mutable Set") val set = mutable.Set.empty[String]
    When("an element is added") set += "clarity"
    Then("the Set should have size 1") assert(set.size === 1)
    And("the Set should contain the added element") assert(set.contains("clarity"))
    markup("This test finished with a **bold** statement!") } }

    Although all of ScalaTest's built-in reporters will display the markup text in some form, the HTML reporter will format the markup information into HTML. Thus, the main purpose of markup is to add nicely formatted text to HTML reports. Here's what the above SetSpec would look like in the HTML reporter:

    Notifiers and alerters

    ScalaTest records text passed to info and markup during tests, and sends the recorded text in the recordedEvents field of test completion events like TestSucceeded and TestFailed. This allows string reporters (like the standard out reporter) to show info and markup text after the test name in a color determined by the outcome of the test. For example, if the test fails, string reporters will show the info and markup text in red. If a test succeeds, string reporters will show the info and markup text in green. While this approach helps the readability of reports, it means that you can't use info to get status updates from long running tests.

    To get immediate (i.e., non-recorded) notifications from tests, you can use note (a Notifier) and alert (an Alerter). Here's an example showing the differences:

    package org.scalatest.examples.funsuite.note
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AnyFunSuite {
    test("An element can be added to an empty mutable Set") {
    info("info is recorded") markup("markup is *also* recorded") note("notes are sent immediately") alert("alerts are also sent immediately")
    val set = mutable.Set.empty[String] set += "clarity" assert(set.size === 1) assert(set.contains("clarity")) } }

    Because note and alert information is sent immediately, it will appear before the test name in string reporters, and its color will be unrelated to the ultimate outcome of the test: note text will always appear in green, alert text will always appear in yellow. Here's an example:

    scala> org.scalatest.run(new SetSpec)
    SetSuite:
      + notes are sent immediately
      + alerts are also sent immediately
    - An element can be added to an empty mutable Set
      + info is recorded
      + markup is *also* recorded
    

    Another example is slowpoke notifications. If you find a test is taking a long time to complete, but you're not sure which test, you can enable slowpoke notifications. ScalaTest will use an Alerter to fire an event whenever a test has been running longer than a specified amount of time.

    In summary, use info and markup for text that should form part of the specification output. Use note and alert to send status notifications. (Because the HTML reporter is intended to produce a readable, printable specification, info and markup text will appear in the HTML report, but note and alert text will not.)

    Pending tests

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException.

    Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality, has not yet been implemented.

    Although pending tests may be used more often in specification-style suites, such as org.scalatest.funspec.AnyFunSpec, you can also use it in AnyFunSuite, like this:

    package org.scalatest.examples.funsuite.pending
    
    import org.scalatest._
    class SetSuite extends funsuite.AnyFunSuite {
    test("An empty Set should have size 0") (pending)
    test("Invoking head on an empty Set should produce NoSuchElementException") { assertThrows[NoSuchElementException] { Set.empty.head } } }

    (Note: "(pending)" is the body of the test. Thus the test contains just one statement, an invocation of the pending method, which throws TestPendingException.) If you run this version of SetSuite with:

    scala> org.scalatest.run(new SetSuite)
    

    It will run both tests, but report that first test is pending. You'll see:

    SetSuite:
    - An empty Set should have size 0 (pending)
    - Invoking head on an empty Set should produce NoSuchElementException
    

    One difference between an ignored test and a pending one is that an ignored test is intended to be used during a significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

    One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException. The reason for this difference is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes abruptly with TestPendingException, as shown in the previous example on Informers that used the GivenWhenThen trait.

    Tagging tests

    A AnyFunSuite's tests may be classified into groups by tagging them with string names. As with any suite, when executing a AnyFunSuite, groups of tests can optionally be included and/or excluded. To tag a AnyFunSuite's tests, you pass objects that extend class org.scalatest.Tag to methods that register tests. Class Tag takes one parameter, a string name. If you have created tag annotation interfaces as described in the Tag documentation, then you will probably want to use tag names on your test functions that match. To do so, simply pass the fully qualified names of the tag interfaces to the Tag constructor. For example, if you've defined a tag annotation interface with fully qualified name, com.mycompany.tags.DbTest, then you could create a matching tag for AnyFunSuites like this:

    package org.scalatest.examples.funsuite.tagging
    
    import org.scalatest.Tag
    object DbTest extends Tag("com.mycompany.tags.DbTest")

    Given these definitions, you could place AnyFunSuite tests into groups with tags like this:

    import org.scalatest.funsuite.AnyFunSuite
    import org.scalatest.tagobjects.Slow
    
    class SetSuite extends AnyFunSuite {
    test("An empty Set should have size 0", Slow) { assert(Set.empty.size === 0) }
    test("Invoking head on an empty Set should produce NoSuchElementException", Slow, DbTest) { assertThrows[NoSuchElementException] { Set.empty.head } } }

    This code marks both tests with the org.scalatest.tags.Slow tag, and the second test with the com.mycompany.tags.DbTest tag.

    The run method takes a Filter, whose constructor takes an optional Set[String] called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

    It is recommended, though not required, that you create a corresponding tag annotation when you create a Tag object. A tag annotation (on the JVM, not Scala.js) allows you to tag all the tests of a AnyFunSuite in one stroke by annotating the class. For more information and examples, see the documentation for class Tag. On Scala.js, to tag all tests of a suite, you'll need to tag each test individually at the test site.

    Shared fixtures

    A test fixture is composed of the objects and other artifacts (files, sockets, database connections, etc.) tests use to do their work. When multiple tests need to work with the same fixtures, it is important to try and avoid duplicating the fixture code across those tests. The more code duplication you have in your tests, the greater drag the tests will have on refactoring the actual production code.

    ScalaTest recommends three techniques to eliminate such code duplication:

    • Refactor using Scala
    • Override withFixture
    • Mix in a before-and-after trait

    Each technique is geared towards helping you reduce code duplication without introducing instance vars, shared mutable objects, or other dependencies between tests. Eliminating shared mutable state across tests will make your test code easier to reason about and more amenable for parallel test execution.

    The following sections describe these techniques, including explaining the recommended usage for each. But first, here's a table summarizing the options:

    Refactor using Scala when different tests need different fixtures.
    get-fixture methods The extract method refactor helps you create a fresh instances of mutable fixture objects in each test that needs them, but doesn't help you clean them up when you're done.
    fixture-context objects By placing fixture methods and fields into traits, you can easily give each test just the newly created fixtures it needs by mixing together traits. Use this technique when you need different combinations of mutable fixture objects in different tests, and don't need to clean up after.
    loan-fixture methods Factor out dupicate code with the loan pattern when different tests need different fixtures that must be cleaned up afterwards.
    Override withFixture when most or all tests need the same fixture.
    withFixture(NoArgTest) The recommended default approach when most or all tests need the same fixture treatment. This general technique allows you, for example, to perform side effects at the beginning and end of all or most tests, transform the outcome of tests, retry tests, make decisions based on test names, tags, or other test data. Use this technique unless:
    Different tests need different fixtures (refactor using Scala instead)
    An exception in fixture code should abort the suite, not fail the test (use a before-and-after trait instead)
    You have objects to pass into tests (override withFixture(OneArgTest) instead)
    withFixture(OneArgTest) Use when you want to pass the same fixture object or objects as a parameter into all or most tests.
    Mix in a before-and-after trait when you want an aborted suite, not a failed test, if the fixture code fails.
    BeforeAndAfter Use this boilerplate-buster when you need to perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
    BeforeAndAfterEach Use when you want to stack traits that perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.

    Calling get-fixture methods

    If you need to create the same mutable fixture objects in multiple tests, and don't need to clean them up after using them, the simplest approach is to write one or more get-fixture methods. A get-fixture method returns a new instance of a needed fixture object (or an holder object containing multiple fixture objects) each time it is called. You can call a get-fixture method at the beginning of each test that needs the fixture, storing the returned object or objects in local variables. Here's an example:

    package org.scalatest.examples.funsuite.getfixture
    
    import org.scalatest.funsuite.AnyFunSuite import collection.mutable.ListBuffer
    class ExampleSuite extends AnyFunSuite {
    class Fixture { val builder = new StringBuilder("ScalaTest is ") val buffer = new ListBuffer[String] }
    def fixture = new Fixture
    test("Testing should be easy") { val f = fixture f.builder.append("easy!") assert(f.builder.toString === "ScalaTest is easy!") assert(f.buffer.isEmpty) f.buffer += "sweet" }
    test("Testing should be fun") { val f = fixture f.builder.append("fun!") assert(f.builder.toString === "ScalaTest is fun!") assert(f.buffer.isEmpty) } }

    The “f.” in front of each use of a fixture object provides a visual indication of which objects are part of the fixture, but if you prefer, you can import the the members with “import f._” and use the names directly.

    If you need to configure fixture objects differently in different tests, you can pass configuration into the get-fixture method. For example, if you could pass in an initial value for a mutable fixture object as a parameter to the get-fixture method.

    Instantiating fixture-context objects

    An alternate technique that is especially useful when different tests need different combinations of fixture objects is to define the fixture objects as instance variables of fixture-context objects whose instantiation forms the body of tests. Like get-fixture methods, fixture-context objects are only appropriate if you don't need to clean up the fixtures after using them.

    To use this technique, you define instance variables intialized with fixture objects in traits and/or classes, then in each test instantiate an object that contains just the fixture objects needed by the test. Traits allow you to mix together just the fixture objects needed by each test, whereas classes allow you to pass data in via a constructor to configure the fixture objects. Here's an example in which fixture objects are partitioned into two traits and each test just mixes together the traits it needs:

    package org.scalatest.examples.funsuite.fixturecontext
    
    import collection.mutable.ListBuffer import org.scalatest.funsuite.AnyFunSuite
    class ExampleSuite extends AnyFunSuite {
    trait Builder { val builder = new StringBuilder("ScalaTest is ") }
    trait Buffer { val buffer = ListBuffer("ScalaTest", "is") }
    // This test needs the StringBuilder fixture test("Testing should be productive") { new Builder { builder.append("productive!") assert(builder.toString === "ScalaTest is productive!") } }
    // This test needs the ListBuffer[String] fixture test("Test code should be readable") { new Buffer { buffer += ("readable!") assert(buffer === List("ScalaTest", "is", "readable!")) } }
    // This test needs both the StringBuilder and ListBuffer test("Test code should be clear and concise") { new Builder with Buffer { builder.append("clear!") buffer += ("concise!") assert(builder.toString === "ScalaTest is clear!") assert(buffer === List("ScalaTest", "is", "concise!")) } } }

    Overriding withFixture(NoArgTest)

    Although the get-fixture method and fixture-context object approaches take care of setting up a fixture at the beginning of each test, they don't address the problem of cleaning up a fixture at the end of the test. If you just need to perform a side-effect at the beginning or end of a test, and don't need to actually pass any fixture objects into the test, you can override withFixture(NoArgTest), one of ScalaTest's lifecycle methods defined in trait Suite.

    Trait Suite's implementation of runTest passes a no-arg test function to withFixture(NoArgTest). It is withFixture's responsibility to invoke that test function. Suite's implementation of withFixture simply invokes the function, like this:

    // Default implementation in trait Suite
    protected def withFixture(test: NoArgTest) = {
      test()
    }
    

    You can, therefore, override withFixture to perform setup before and/or cleanup after invoking the test function. If you have cleanup to perform, you should invoke the test function inside a try block and perform the cleanup in a finally clause, in case an exception propagates back through withFixture. (If a test fails because of an exception, the test function invoked by withFixture will result in a Failed wrapping the exception. Nevertheless, best practice is to perform cleanup in a finally clause just in case an exception occurs.)

    The withFixture method is designed to be stacked, and to enable this, you should always call the super implementation of withFixture, and let it invoke the test function rather than invoking the test function directly. In other words, instead of writing “test()”, you should write “super.withFixture(test)”, like this:

    // Your implementation
    override def withFixture(test: NoArgTest) = {
      // Perform setup
      try super.withFixture(test) // Invoke the test function
      finally {
        // Perform cleanup
      }
    }
    

    Here's an example in which withFixture(NoArgTest) is used to take a snapshot of the working directory if a test fails, and send that information to the reporter:

    package org.scalatest.examples.funsuite.noargtest
    
    import java.io.File import org.scalatest._
    class ExampleSuite extends funsuite.AnyFunSuite {
    override def withFixture(test: NoArgTest) = {
    super.withFixture(test) match { case failed: Failed => val currDir = new File(".") val fileNames = currDir.list() info("Dir snapshot: " + fileNames.mkString(", ")) failed case other => other } }
    test("This test should succeed") { assert(1 + 1 === 2) }
    test("This test should fail") { assert(1 + 1 === 3) } }

    Running this version of ExampleSuite in the interpreter in a directory with two files, hello.txt and world.txt would give the following output:

    scala> org.scalatest.run(new ExampleSuite)
    ExampleSuite:
    - this test should succeed
    - this test should fail *** FAILED ***
      2 did not equal 3 (:33)
      + Dir snapshot: hello.txt, world.txt 
    

    Note that the NoArgTest passed to withFixture, in addition to an apply method that executes the test, also includes the test name and the config map passed to runTest. Thus you can also use the test name and configuration objects in your withFixture implementation.

    Calling loan-fixture methods

    If you need to both pass a fixture object into a test and perform cleanup at the end of the test, you'll need to use the loan pattern. If different tests need different fixtures that require cleanup, you can implement the loan pattern directly by writing loan-fixture methods. A loan-fixture method takes a function whose body forms part or all of a test's code. It creates a fixture, passes it to the test code by invoking the function, then cleans up the fixture after the function returns.

    The following example shows three tests that use two fixtures, a database and a file. Both require cleanup after, so each is provided via a loan-fixture method. (In this example, the database is simulated with a StringBuffer.)

    package org.scalatest.examples.funsuite.loanfixture
    
    import java.util.concurrent.ConcurrentHashMap
    object DbServer { // Simulating a database server type Db = StringBuffer private val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer databases.put(name, db) db } def removeDb(name: String) { databases.remove(name) } }
    import org.scalatest.funsuite.AnyFunSuite import DbServer._ import java.util.UUID.randomUUID import java.io._
    class ExampleSuite extends AnyFunSuite {
    def withDatabase(testCode: Db => Any) { val dbName = randomUUID.toString val db = createDb(dbName) // create the fixture try { db.append("ScalaTest is ") // perform setup testCode(db) // "loan" the fixture to the test } finally removeDb(dbName) // clean up the fixture }
    def withFile(testCode: (File, FileWriter) => Any) { val file = File.createTempFile("hello", "world") // create the fixture val writer = new FileWriter(file) try { writer.write("ScalaTest is ") // set up the fixture testCode(file, writer) // "loan" the fixture to the test } finally writer.close() // clean up the fixture }
    // This test needs the file fixture test("Testing should be productive") { withFile { (file, writer) => writer.write("productive!") writer.flush() assert(file.length === 24) } }
    // This test needs the database fixture test("Test code should be readable") { withDatabase { db => db.append("readable!") assert(db.toString === "ScalaTest is readable!") } }
    // This test needs both the file and the database test("Test code should be clear and concise") { withDatabase { db => withFile { (file, writer) => // loan-fixture methods compose db.append("clear!") writer.write("concise!") writer.flush() assert(db.toString === "ScalaTest is clear!") assert(file.length === 21) } } } }

    As demonstrated by the last test, loan-fixture methods compose. Not only do loan-fixture methods allow you to give each test the fixture it needs, they allow you to give a test multiple fixtures and clean everything up afterwards.

    Also demonstrated in this example is the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in this example. This keeps tests completely isolated, allowing you to run them in parallel if desired.

    Overriding withFixture(OneArgTest)

    If all or most tests need the same fixture, you can avoid some of the boilerplate of the loan-fixture method approach by using a FixtureSuite and overriding withFixture(OneArgTest). Each test in a FixtureSuite takes a fixture as a parameter, allowing you to pass the fixture into the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a withFixture method that takes a OneArgTest. This withFixture method is responsible for invoking the one-arg test function, so you can perform fixture set up before, and clean up after, invoking and passing the fixture into the test function.

    To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let withFixture(NoArgTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing the fixture object to the toNoArgTest method of OneArgTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:

    withFixture(test.toNoArgTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.funsuite.oneargtest
    
    import org.scalatest.funsuite import java.io._
    class ExampleSuite extends funsuite.FixtureAnyFunSuite {
    case class FixtureParam(file: File, writer: FileWriter)
    def withFixture(test: OneArgTest) = {
    // create the fixture val file = File.createTempFile("hello", "world") val writer = new FileWriter(file) val theFixture = FixtureParam(file, writer)
    try { writer.write("ScalaTest is ") // set up the fixture withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test } finally writer.close() // clean up the fixture }
    test("Testing should be easy") { f => f.writer.write("easy!") f.writer.flush() assert(f.file.length === 18) }
    test("Testing should be fun") { f => f.writer.write("fun!") f.writer.flush() assert(f.file.length === 17) } }

    In this example, the tests actually required two fixture objects, a File and a FileWriter. In such situations you can simply define the FixtureParam type to be a tuple containing the objects, or as is done in this example, a case class containing the objects. For more information on the withFixture(OneArgTest) technique, see the documentation for funsuite.FixtureAnyFunSuite.

    Mixing in BeforeAndAfter

    In all the shared fixture examples shown so far, the activities of creating, setting up, and cleaning up the fixture objects have been performed during the test. This means that if an exception occurs during any of these activities, it will be reported as a test failure. Sometimes, however, you may want setup to happen before the test starts, and cleanup after the test has completed, so that if an exception occurs during setup or cleanup, the entire suite aborts and no more tests are attempted. The simplest way to accomplish this in ScalaTest is to mix in trait BeforeAndAfter. With this trait you can denote a bit of code to run before each test with before and/or after each test each test with after, like this:

    package org.scalatest.examples.funsuite.beforeandafter
    
    import org.scalatest.funsuite.AnyFunSuite import org.scalatest.BeforeAndAfter import collection.mutable.ListBuffer
    class ExampleSuite extends AnyFunSuite with BeforeAndAfter {
    val builder = new StringBuilder val buffer = new ListBuffer[String]
    before { builder.append("ScalaTest is ") }
    after { builder.clear() buffer.clear() }
    test("testing should be easy") { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
    test("testing should be fun") { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) } }

    Note that the only way before and after code can communicate with test code is via some side-effecting mechanism, commonly by reassigning instance vars or by changing the state of mutable objects held from instance vals (as in this example). If using instance vars or mutable objects held from instance vals you wouldn't be able to run tests in parallel in the same instance of the test class (on the JVM, not Scala.js) unless you synchronized access to the shared, mutable state. This is why ScalaTest's ParallelTestExecution trait extends OneInstancePerTest. By running each test in its own instance of the class, each test has its own copy of the instance variables, so you don't need to synchronize. If you mixed ParallelTestExecution into the ExampleSuite above, the tests would run in parallel just fine without any synchronization needed on the mutable StringBuilder and ListBuffer[String] objects.

    Although BeforeAndAfter provides a minimal-boilerplate way to execute code before and after tests, it isn't designed to enable stackable traits, because the order of execution would be non-obvious. If you want to factor out before and after code that is common to multiple test suites, you should use trait BeforeAndAfterEach instead, as shown later in the next section, composing fixtures by stacking traits.

    Composing fixtures by stacking traits

    In larger projects, teams often end up with several different fixtures that test classes need in different combinations, and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing withFixture methods in several traits, each of which call super.withFixture. Here's an example in which the StringBuilder and ListBuffer[String] fixtures used in the previous examples have been factored out into two stackable fixture traits named Builder and Buffer:

    package org.scalatest.examples.funsuite.composingwithfixture
    
    import org.scalatest._ import collection.mutable.ListBuffer
    trait Builder extends TestSuiteMixin { this: TestSuite =>
    val builder = new StringBuilder
    abstract override def withFixture(test: NoArgTest) = { builder.append("ScalaTest is ") try super.withFixture(test) // To be stackable, must call super.withFixture finally builder.clear() } }
    trait Buffer extends TestSuiteMixin { this: TestSuite =>
    val buffer = new ListBuffer[String]
    abstract override def withFixture(test: NoArgTest) = { try super.withFixture(test) // To be stackable, must call super.withFixture finally buffer.clear() } }
    class ExampleSuite extends funsuite.AnyFunSuite with Builder with Buffer {
    test("Testing should be easy") { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
    test("Testing should be fun") { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) buffer += "clear" } }

    By mixing in both the Builder and Buffer traits, ExampleSuite gets both fixtures, which will be initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution. In this case, Builder is “super” to Buffer. If you wanted Buffer to be “super” to Builder, you need only switch the order you mix them together, like this:

    class Example2Suite extends AnyFunSuite with Buffer with Builder
    

    And if you only need one fixture you mix in only that trait:

    class Example3Suite extends AnyFunSuite with Builder
    

    Another way to create stackable fixture traits is by extending the BeforeAndAfterEach and/or BeforeAndAfterAll traits. BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp), and an afterEach method that will be run after (like JUnit's tearDown). Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests, and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it were rewritten to use the BeforeAndAfterEach methods instead of withFixture:

    package org.scalatest.examples.funsuite.composingbeforeandaftereach
    
    import org.scalatest._ import org.scalatest.BeforeAndAfterEach import collection.mutable.ListBuffer
    trait Builder extends BeforeAndAfterEach { this: Suite =>
    val builder = new StringBuilder
    override def beforeEach() { builder.append("ScalaTest is ") super.beforeEach() // To be stackable, must call super.beforeEach }
    override def afterEach() { try { super.afterEach() // To be stackable, must call super.afterEach } finally builder.clear() } }
    trait Buffer extends BeforeAndAfterEach { this: Suite =>
    val buffer = new ListBuffer[String]
    override def afterEach() { try { super.afterEach() // To be stackable, must call super.afterEach } finally buffer.clear() } }
    class ExampleSuite extends funsuite.AnyFunSuite with Builder with Buffer {
    test("Testing should be easy") { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
    test("Testing should be fun") { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) buffer += "clear" } }

    To get the same ordering as withFixture, place your super.beforeEach call at the end of each beforeEach method, and the super.afterEach call at the beginning of each afterEach method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the cleanup code is performed even if super.afterEach throws an exception.

    The difference between stacking traits that extend BeforeAndAfterEach versus traits that implement withFixture is that setup and cleanup code happens before and after the test in BeforeAndAfterEach, but at the beginning and end of the test in withFixture. Thus if a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the beforeEach or afterEach methods of BeforeAndAfterEach complete abruptly, it is considered an aborted suite, which will result in a SuiteAborted event.

    Shared tests

    Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in a AnyFunSuite, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any AnyFunSuite that uses them, so that the tests they contain will be registered as tests in that AnyFunSuite. For example, given this stack class:

    import scala.collection.mutable.ListBuffer
    
    class Stack[T] {
    val MAX = 10 private val buf = new ListBuffer[T]
    def push(o: T) { if (!full) buf.prepend(o) else throw new IllegalStateException("can't push onto a full stack") }
    def pop(): T = { if (!empty) buf.remove(0) else throw new IllegalStateException("can't pop an empty stack") }
    def peek: T = { if (!empty) buf(0) else throw new IllegalStateException("can't pop an empty stack") }
    def full: Boolean = buf.size == MAX def empty: Boolean = buf.size == 0 def size = buf.size
    override def toString = buf.mkString("Stack(", ", ", ")") }

    You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your AnyFunSuite for stack, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures.

    You can define a behavior function that encapsulates these shared tests inside the AnyFunSuite that uses them. If they are shared between different AnyFunSuites, however, you could also define them in a separate trait that is mixed into each AnyFunSuite that uses them. For example, here the nonEmptyStack behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

    import org.scalatest.funsuite.AnyFunSuite
    
    trait FunSuiteStackBehaviors { this: AnyFunSuite =>
    def nonEmptyStack(createNonEmptyStack: => Stack[Int], lastItemAdded: Int) {
    test("empty is invoked on this non-empty stack: " + createNonEmptyStack.toString) { val stack = createNonEmptyStack assert(!stack.empty) }
    test("peek is invoked on this non-empty stack: " + createNonEmptyStack.toString) { val stack = createNonEmptyStack val size = stack.size assert(stack.peek === lastItemAdded) assert(stack.size === size) }
    test("pop is invoked on this non-empty stack: " + createNonEmptyStack.toString) { val stack = createNonEmptyStack val size = stack.size assert(stack.pop === lastItemAdded) assert(stack.size === size - 1) } }
    def nonFullStack(createNonFullStack: => Stack[Int]) {
    test("full is invoked on this non-full stack: " + createNonFullStack.toString) { val stack = createNonFullStack assert(!stack.full) }
    test("push is invoked on this non-full stack: " + createNonFullStack.toString) { val stack = createNonFullStack val size = stack.size stack.push(7) assert(stack.size === size + 1) assert(stack.peek === 7) } } }

    Given these behavior functions, you could invoke them directly, but AnyFunSuite offers a DSL for the purpose, which looks like this:

    testsFor(nonEmptyStack(stackWithOneItem, lastValuePushed))
    testsFor(nonFullStack(stackWithOneItem))
    

    If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and reassigning a stack var in beforeEach, you could write your behavior functions in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be in scope already inside the behavior function. In that case, your code would look like this:

    testsFor(nonEmptyStack) // assuming lastValuePushed is also in scope inside nonEmptyStack
    testsFor(nonFullStack)
    

    The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:

    import org.scalatest.funsuite.AnyFunSuite
    
    class StackFunSuite extends AnyFunSuite with FunSuiteStackBehaviors {
    // Stack fixture creation methods def emptyStack = new Stack[Int]
    def fullStack = { val stack = new Stack[Int] for (i <- 0 until stack.MAX) stack.push(i) stack }
    def stackWithOneItem = { val stack = new Stack[Int] stack.push(9) stack }
    def stackWithOneItemLessThanCapacity = { val stack = new Stack[Int] for (i <- 1 to 9) stack.push(i) stack }
    val lastValuePushed = 9
    test("empty is invoked on an empty stack") { val stack = emptyStack assert(stack.empty) }
    test("peek is invoked on an empty stack") { val stack = emptyStack assertThrows[IllegalStateException] { stack.peek } }
    test("pop is invoked on an empty stack") { val stack = emptyStack assertThrows[IllegalStateException] { stack.pop } }
    testsFor(nonEmptyStack(stackWithOneItem, lastValuePushed)) testsFor(nonFullStack(stackWithOneItem))
    testsFor(nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed)) testsFor(nonFullStack(stackWithOneItemLessThanCapacity))
    test("full is invoked on a full stack") { val stack = fullStack assert(stack.full) }
    testsFor(nonEmptyStack(fullStack, lastValuePushed))
    test("push is invoked on a full stack") { val stack = fullStack assertThrows[IllegalStateException] { stack.push(10) } } }

    If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

    scala> org.scalatest.run(new StackFunSuite)
    StackFunSuite:
    - empty is invoked on an empty stack
    - peek is invoked on an empty stack
    - pop is invoked on an empty stack
    - empty is invoked on this non-empty stack: Stack(9)
    - peek is invoked on this non-empty stack: Stack(9)
    - pop is invoked on this non-empty stack: Stack(9)
    - full is invoked on this non-full stack: Stack(9)
    - push is invoked on this non-full stack: Stack(9)
    - empty is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    - peek is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    - pop is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    - full is invoked on this non-full stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    - push is invoked on this non-full stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    - full is invoked on a full stack
    - empty is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
    - peek is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
    - pop is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
    - push is invoked on a full stack
    

    One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. In a AnyFunSuite there is no nesting construct analogous to AnyFunSpec's describe clause. Therefore, you need to do a bit of extra work to ensure that the test names are unique. If a duplicate test name problem shows up in a AnyFunSuite, you'll need to pass in a prefix or suffix string to add to each test name. You can pass this string the same way you pass any other data needed by the shared tests, or just call toString on the shared fixture object. This is the approach taken by the previous FunSuiteStackBehaviors example.

    Given this FunSuiteStackBehaviors trait, calling it with the stackWithOneItem fixture, like this:

    testsFor(nonEmptyStack(stackWithOneItem, lastValuePushed))
    

    yields test names:

    • empty is invoked on this non-empty stack: Stack(9)
    • peek is invoked on this non-empty stack: Stack(9)
    • pop is invoked on this non-empty stack: Stack(9)

    Whereas calling it with the stackWithOneItemLessThanCapacity fixture, like this:

    testsFor(nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed))
    

    yields different test names:

    • empty is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    • peek is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
    • pop is invoked on this non-empty stack: Stack(9, 8, 7, 6, 5, 4, 3, 2, 1)
  2. trait AnyFunSuiteLike extends TestSuite with TestRegistration with Informing with Notifying with Alerting with Documenting

    Implementation trait for class AnyFunSpec, which facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    Implementation trait for class AnyFunSpec, which facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

    FunSpec is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of AnyFunSpec into some other class, you can use this trait instead, because class AnyFunSpec does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of AnyFunSpec.

  3. abstract class AsyncFunSuite extends AsyncFunSuiteLike

    Enables testing of asynchronous code without blocking, using a style consistent with traditional AnyFunSuite tests.

    Enables testing of asynchronous code without blocking, using a style consistent with traditional AnyFunSuite tests.

    Recommended Usage: AsyncFunSuite is intended to enable users of AnyFunSuite to write non-blocking asynchronous tests that are consistent with their traditional AnyFunSuite tests. Note: AsyncFunSuite is intended for use in special situations where non-blocking asynchronous testing is needed, with class AnyFunSuite used for general needs.

    Given a Future returned by the code you are testing, you need not block until the Future completes before performing assertions against its value. You can instead map those assertions onto the Future and return the resulting Future[Assertion] to ScalaTest. The test will complete asynchronously, when the Future[Assertion] completes.

    Here's an example AsyncFunSuite:

    package org.scalatest.examples.asyncfunsuite
    
    import org.scalatest.funsuite.AsyncFunSuite import scala.concurrent.Future
    class AddSuite extends AsyncFunSuite {
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    test("addSoon will eventually compute a sum of passed Ints") { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
    def addNow(addends: Int*): Int = addends.sum
    test("addNow will immediately compute a sum of passed Ints") { val sum: Int = addNow(1, 2) // You can also write synchronous tests, which // must result in type Assertion: assert(sum == 3) } }

    test” is a method, defined in AsyncFunSuite, which will be invoked by the primary constructor of AddSuite. You specify the name of the test as a string between the parentheses, and the test code itself between curly braces. The test code is a function passed as a by-name parameter to test, which registers it for later execution. The result type of the by-name in an AsyncFunSuite must be Future[Assertion].

    Starting with version 3.0.0, ScalaTest assertions and matchers have result type Assertion. The result type of the first test in the example above, therefore, is Future[Assertion]. For clarity, here's the relevant code in a REPL session:

    scala> import org.scalatest._
    import org.scalatest._
    
    scala> import Assertions._
    import Assertions._
    
    scala> import scala.concurrent.Future
    import scala.concurrent.Future
    
    scala> import scala.concurrent.ExecutionContext
    import scala.concurrent.ExecutionContext
    
    scala> implicit val executionContext = ExecutionContext.Implicits.global
    executionContext: scala.concurrent.ExecutionContextExecutor = scala.concurrent.impl.ExecutionContextImpl@26141c5b
    
    scala> def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    addSoon: (addends: Int*)scala.concurrent.Future[Int]
    
    scala> val futureSum: Future[Int] = addSoon(1, 2)
    futureSum: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@721f47b2
    
    scala> futureSum map { sum => assert(sum == 3) }
    res0: scala.concurrent.Future[org.scalatest.Assertion] = scala.concurrent.impl.Promise$DefaultPromise@3955cfcb
    

    The second test has result type Assertion:

    scala> def addNow(addends: Int*): Int = addends.sum
    addNow: (addends: Int*)Int
    
    scala> val sum: Int = addNow(1, 2)
    sum: Int = 3
    
    scala> assert(sum == 3)
    res1: org.scalatest.Assertion = Succeeded
    

    When AddSuite is constructed, the second test will be implicitly converted to Future[Assertion] and registered. The implicit conversion is from Assertion to Future[Assertion], so you must end synchronous tests in some ScalaTest assertion or matcher expression. If a test would not otherwise end in type Assertion, you can place succeed at the end of the test. succeed, a field in trait Assertions, returns the Succeeded singleton:

    scala> succeed
    res2: org.scalatest.Assertion = Succeeded
    

    Thus placing succeed at the end of a test body will satisfy the type checker:

    test("addNow will immediately compute a sum of passed Ints") {
      val sum: Int = addNow(1, 2)
      assert(sum == 3)
      println("hi") // println has result type Unit
      succeed       // succeed has result type Assertion
    }
    

    An AsyncFunSuite's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

    Tests can only be registered with the test method while the AsyncFunSuite is in its registration phase. Any attempt to register a test after the AsyncFunSuite has entered its ready phase, i.e., after run has been invoked on the AsyncFunSuite, will be met with a thrown TestRegistrationClosedException. The recommended style of using AsyncFunSuite is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

    Asynchronous execution model

    AsyncFunSuite extends AsyncTestSuite, which provides an implicit scala.concurrent.ExecutionContext named executionContext. This execution context is used by AsyncFunSuite to transform the Future[Assertion]s returned by each test into the FutureOutcome returned by the test function passed to withFixture. This ExecutionContext is also intended to be used in the tests, including when you map assertions onto futures.

    On both the JVM and Scala.js, the default execution context provided by ScalaTest's asynchronous testing styles confines execution to a single thread per test. On JavaScript, where single-threaded execution is the only possibility, the default execution context is scala.scalajs.concurrent.JSExecutionContext.Implicits.queue. On the JVM, the default execution context is a serial execution context provided by ScalaTest itself.

    When ScalaTest's serial execution context is called upon to execute a task, that task is recorded in a queue for later execution. For example, one task that will be placed in this queue is the task that transforms the Future[Assertion] returned by an asynchronous test body to the FutureOutcome returned from the test function. Other tasks that will be queued are any transformations of, or callbacks registered on, Futures that occur in your test body, including any assertions you map onto Futures. Once the test body returns, the thread that executed the test body will execute the tasks in that queue one after another, in the order they were enqueued.

    ScalaTest provides its serial execution context as the default on the JVM for three reasons. First, most often running both tests and suites in parallel does not give a significant performance boost compared to just running suites in parallel. Thus parallel execution of Future transformations within individual tests is not generally needed for performance reasons.

    Second, if multiple threads are operating in the same suite concurrently, you'll need to make sure access to any mutable fixture objects by multiple threads is synchronized. Although access to mutable state along the same linear chain of Future transformations need not be synchronized, this does not hold true for callbacks, and in general it is easy to make a mistake. Simply put: synchronizing access to shared mutable state is difficult and error prone. Because ScalaTest's default execution context on the JVM confines execution of Future transformations and call backs to a single thread, you need not (by default) worry about synchronizing access to mutable state in your asynchronous-style tests.

    Third, asynchronous-style tests need not be complete when the test body returns, because the test body returns a Future[Assertion]. This Future[Assertion] will often represent a test that has not yet completed. As a result, when using a more traditional execution context backed by a thread-pool, you could potentially start many more tests executing concurrently than there are threads in the thread pool. The more concurrently execute tests you have competing for threads from the same limited thread pool, the more likely it will be that tests will intermitently fail due to timeouts.

    Using ScalaTest's serial execution context on the JVM will ensure the same thread that produced the Future[Assertion] returned from a test body is also used to execute any tasks given to the execution context while executing the test body—and that thread will not be allowed to do anything else until the test completes. If the serial execution context's task queue ever becomes empty while the Future[Assertion] returned by that test's body has not yet completed, the thread will block until another task for that test is enqueued. Although it may seem counter-intuitive, this blocking behavior means the total number of tests allowed to run concurrently will be limited to the total number of threads executing suites. This fact means you can tune the thread pool such that maximum performance is reached while avoiding (or at least, reducing the likelihood of) tests that fail due to timeouts because of thread competition.

    This thread confinement strategy does mean, however, that when you are using the default execution context on the JVM, you must be sure to never block in the test body waiting for a task to be completed by the execution context. If you block, your test will never complete. This kind of problem will be obvious, because the test will consistently hang every time you run it. (If a test is hanging, and you're not sure which one it is, enable slowpoke notifications.) If you really do want to block in your tests, you may wish to just use a traditional AnyFunSuite with ScalaFutures instead. Alternatively, you could override the executionContext and use a traditional ExecutionContext backed by a thread pool. This will enable you to block in an asynchronous-style test on the JVM, but you'll need to worry about synchronizing access to shared mutable state.

    To use a different execution context, just override executionContext. For example, if you prefer to use the runNow execution context on Scala.js instead of the default queue, you would write:

    // on Scala.js
    implicit override def executionContext =
        org.scalatest.concurrent.TestExecutionContext.runNow
    

    If you prefer on the JVM to use the global execution context, which is backed by a thread pool, instead of ScalaTest's default serial execution contex, which confines execution to a single thread, you would write:

    // on the JVM (and also compiles on Scala.js, giving
    // you the queue execution context)
    implicit override def executionContext =
        scala.concurrent.ExecutionContext.Implicits.global
    

    Serial and parallel test execution

    By default (unless you mix in ParallelTestExecution), tests in an AsyncFunSuite will be executed one after another, i.e., serially. This is true whether those tests return Assertion or Future[Assertion], no matter what threads are involved. This default behavior allows you to re-use a shared fixture, such as an external database that needs to be cleaned after each test, in multiple tests in async-style suites. This is implemented by registering each test, other than the first test, to run as a continuation after the previous test completes.

    If you want the tests of an AsyncFunSuite to be executed in parallel, you must mix in ParallelTestExecution and enable parallel execution of tests in your build. You enable parallel execution in Runner with the -P command line flag. In the ScalaTest Maven Plugin, set parallel to true. In sbt, parallel execution is the default, but to be explicit you can write:

    parallelExecution in Test := true // the default in sbt
    

    On the JVM, if both ParallelTestExecution is mixed in and parallel execution is enabled in the build, tests in an async-style suite will be started in parallel, using threads from the Distributor, and allowed to complete in parallel, using threads from the executionContext. If you are using ScalaTest's serial execution context, the JVM default, asynchronous tests will run in parallel very much like traditional (such as AnyFunSuite) tests run in parallel: 1) Because ParallelTestExecution extends OneInstancePerTest, each test will run in its own instance of the test class, you need not worry about synchronizing access to mutable instance state shared by different tests in the same suite. 2) Because the serial execution context will confine the execution of each test to the single thread that executes the test body, you need not worry about synchronizing access to shared mutable state accessed by transformations and callbacks of Futures inside the test.

    If ParallelTestExecution is mixed in but parallel execution of suites is not enabled, asynchronous tests on the JVM will be started sequentially, by the single thread that invoked run, but without waiting for one test to complete before the next test is started. As a result, asynchronous tests will be allowed to complete in parallel, using threads from the executionContext. If you are using the serial execution context, however, you'll see the same behavior you see when parallel execution is disabled and a traditional suite that mixes in ParallelTestExecution is executed: the tests will run sequentially. If you use an execution context backed by a thread-pool, such as global, however, even though tests will be started sequentially by one thread, they will be allowed to run concurrently using threads from the execution context's thread pool.

    The latter behavior is essentially what you'll see on Scala.js when you execute a suite that mixes in ParallelTestExecution. Because only one thread exists when running under JavaScript, you can't "enable parallel execution of suites." However, it may still be useful to run tests in parallel on Scala.js, because tests can invoke API calls that are truly asynchronous by calling into external APIs that take advantage of non-JavaScript threads. Thus on Scala.js, ParallelTestExecution allows asynchronous tests to run in parallel, even though they must be started sequentially. This may give you better performance when you are using API calls in your Scala.js tests that are truly asynchronous.

    Futures and expected exceptions

    If you need to test for expected exceptions in the context of futures, you can use the recoverToSucceededIf and recoverToExceptionIf methods of trait RecoverMethods. Because this trait is mixed into supertrait AsyncTestSuite, both of these methods are available by default in an AsyncFunSuite.

    If you just want to ensure that a future fails with a particular exception type, and do not need to inspect the exception further, use recoverToSucceededIf:

    recoverToSucceededIf[IllegalStateException] { // Result type: Future[Assertion]
      emptyStackActor ? Peek
    }
    

    The recoverToSucceededIf method performs a job similar to assertThrows, except in the context of a future. It transforms a Future of any type into a Future[Assertion] that succeeds only if the original future fails with the specified exception. Here's an example in the REPL:

    scala> import org.scalatest.RecoverMethods._
    import org.scalatest.RecoverMethods._
    
    scala> import scala.concurrent.Future
    import scala.concurrent.Future
    
    scala> import scala.concurrent.ExecutionContext.Implicits.global
    import scala.concurrent.ExecutionContext.Implicits.global
    
    scala> recoverToSucceededIf[IllegalStateException] {
         |   Future { throw new IllegalStateException }
         | }
    res0: scala.concurrent.Future[org.scalatest.Assertion] = ...
    
    scala> res0.value
    res1: Option[scala.util.Try[org.scalatest.Assertion]] = Some(Success(Succeeded))
    

    Otherwise it fails with an error message similar to those given by assertThrows:

    scala> recoverToSucceededIf[IllegalStateException] {
         |   Future { throw new RuntimeException }
         | }
    res2: scala.concurrent.Future[org.scalatest.Assertion] = ...
    
    scala> res2.value
    res3: Option[scala.util.Try[org.scalatest.Assertion]] =
        Some(Failure(org.scalatest.exceptions.TestFailedException: Expected exception
          java.lang.IllegalStateException to be thrown, but java.lang.RuntimeException
          was thrown))
    
    scala> recoverToSucceededIf[IllegalStateException] {
         |   Future { 42 }
         | }
    res4: scala.concurrent.Future[org.scalatest.Assertion] = ...
    
    scala> res4.value
    res5: Option[scala.util.Try[org.scalatest.Assertion]] =
        Some(Failure(org.scalatest.exceptions.TestFailedException: Expected exception
          java.lang.IllegalStateException to be thrown, but no exception was thrown))
    

    The recoverToExceptionIf method differs from the recoverToSucceededIf in its behavior when the assertion succeeds: recoverToSucceededIf yields a Future[Assertion], whereas recoverToExceptionIf yields a Future[T], where T is the expected exception type.

    recoverToExceptionIf[IllegalStateException] { // Result type: Future[IllegalStateException]
      emptyStackActor ? Peek
    }
    

    In other words, recoverToExpectionIf is to intercept as recovertToSucceededIf is to assertThrows. The first one allows you to perform further assertions on the expected exception. The second one gives you a result type that will satisfy the type checker at the end of the test body. Here's an example showing recoverToExceptionIf in the REPL:

    scala> val futureEx =
         |   recoverToExceptionIf[IllegalStateException] {
         |     Future { throw new IllegalStateException("hello") }
         |   }
    futureEx: scala.concurrent.Future[IllegalStateException] = ...
    
    scala> futureEx.value
    res6: Option[scala.util.Try[IllegalStateException]] =
        Some(Success(java.lang.IllegalStateException: hello))
    
    scala> futureEx map { ex => assert(ex.getMessage == "world") }
    res7: scala.concurrent.Future[org.scalatest.Assertion] = ...
    
    scala> res7.value
    res8: Option[scala.util.Try[org.scalatest.Assertion]] =
        Some(Failure(org.scalatest.exceptions.TestFailedException: "[hello]" did not equal "[world]"))
    

    Ignored tests

    To support the common use case of temporarily disabling a test, with the good intention of resurrecting the test at a later time, AsyncFunSuite provides registration methods that start with ignore instead of test. Here's an example:

    package org.scalatest.examples.asyncfunsuite.ignore
    
    import org.scalatest.AsyncFunSuite import scala.concurrent.Future
    class AddSuite extends AsyncFunSuite {
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    ignore("addSoon will eventually compute a sum of passed Ints") { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
    def addNow(addends: Int*): Int = addends.sum
    test("addNow will immediately compute a sum of passed Ints") { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

    If you run this version of AddSuite with:

    scala> org.scalatest.run(new AddSuite)
    

    It will run only the second test and report that the first test was ignored:

    AddSuite:
    - addSoon will eventually compute a sum of passed Ints !!! IGNORED !!!
    - addNow will immediately compute a sum of passed Ints
    

    If you wish to temporarily ignore an entire suite of tests, you can (on the JVM, not Scala.js) annotate the test class with @Ignore, like this:

    package org.scalatest.examples.asyncfunsuite.ignoreall
    
    import org.scalatest.funsuite.AsyncFunSuite import scala.concurrent.Future import org.scalatest.Ignore
    @Ignore class AddSuite extends AsyncFunSuite {
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    test("addSoon will eventually compute a sum of passed Ints") { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
    def addNow(addends: Int*): Int = addends.sum
    test("addNow will immediately compute a sum of passed Ints") { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

    When you mark a test class with a tag annotation, ScalaTest will mark each test defined in that class with that tag. Thus, marking the AddSuite in the above example with the @Ignore tag annotation means that both tests in the class will be ignored. If you run the above AddSuite in the Scala interpreter, you'll see:

    scala> org.scalatest.run(new AddSuite)
    AddSuite:
    - addSoon will eventually compute a sum of passed Ints !!! IGNORED !!!
    - addNow will immediately compute a sum of passed Ints !!! IGNORED !!!
    

    Note that marking a test class as ignored won't prevent it from being discovered by ScalaTest. Ignored classes will be discovered and run, and all their tests will be reported as ignored. This is intended to keep the ignored class visible, to encourage the developers to eventually fix and “un-ignore” it. If you want to prevent a class from being discovered at all (on the JVM, not Scala.js), use the DoNotDiscover annotation instead.

    If you want to ignore all tests of a suite on Scala.js, where annotations can't be inspected at runtime, you'll need to change test to ignore at each test site. To make a suite non-discoverable on Scala.js, ensure it does not declare a public no-arg constructor. You can either declare a public constructor that takes one or more arguments, or make the no-arg constructor non-public. Because this technique will also make the suite non-discoverable on the JVM, it is a good approach for suites you want to run (but not be discoverable) on both Scala.js and the JVM.

    Informers

    One of the parameters to AsyncFunSuite's run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by AsyncFunSuite's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event. Here's an example that shows both a direct use as well as an indirect use through the methods of GivenWhenThen:

    package org.scalatest.examples.asyncfunsuite.info
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AsyncFunSuite with GivenWhenThen {
    test("An element can be added to an empty mutable Set") {
    Given("an empty mutable Set") val set = mutable.Set.empty[String]
    When("an element is added") set += "clarity"
    Then("the Set should have size 1") assert(set.size === 1)
    And("the Set should contain the added element") assert(set.contains("clarity"))
    info("That's all folks!") succeed } }

    If you run this AsyncFunSuite from the interpreter, you will see the following output:

    scala> org.scalatest.run(new SetSuite)
    SetSuite:
    - an element can be added to an empty mutable Set
      + Given an empty mutable Set
      + When an element is added
      + Then the Set should have size 1
      + And the Set should contain the added element
      + That's all folks!
    

    Documenters

    AsyncFunSuite also provides a markup method that returns a Documenter, which allows you to send to the Reporter text formatted in Markdown syntax. You can pass the extra information to the Documenter via its apply method. The Documenter will then pass the information to the Reporter via an MarkupProvided event.

    Here's an example AsyncFunSuite that uses markup:

    package org.scalatest.examples.asyncfunsuite.markup
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AsyncFunSuite with GivenWhenThen {
    markup { """ Mutable Set ———-- A set is a collection that contains no duplicate elements. To implement a concrete mutable set, you need to provide implementations of the following methods: def contains(elem: A): Boolean def iterator: Iterator[A] def += (elem: A): this.type def -= (elem: A): this.type If you wish that methods like `take`, `drop`, `filter` return the same kind of set, you should also override: def empty: This It is also good idea to override methods `foreach` and `size` for efficiency. """ }
    test("An element can be added to an empty mutable Set") {
    Given("an empty mutable Set") val set = mutable.Set.empty[String]
    When("an element is added") set += "clarity"
    Then("the Set should have size 1") assert(set.size === 1)
    And("the Set should contain the added element") assert(set.contains("clarity"))
    markup("This test finished with a **bold** statement!") succeed } }

    Although all of ScalaTest's built-in reporters will display the markup text in some form, the HTML reporter will format the markup information into HTML. Thus, the main purpose of markup is to add nicely formatted text to HTML reports. Here's what the above SetSpec would look like in the HTML reporter:

    Notifiers and alerters

    ScalaTest records text passed to info and markup during tests, and sends the recorded text in the recordedEvents field of test completion events like TestSucceeded and TestFailed. This allows string reporters (like the standard out reporter) to show info and markup text after the test name in a color determined by the outcome of the test. For example, if the test fails, string reporters will show the info and markup text in red. If a test succeeds, string reporters will show the info and markup text in green. While this approach helps the readability of reports, it means that you can't use info to get status updates from long running tests.

    To get immediate (i.e., non-recorded) notifications from tests, you can use note (a Notifier) and alert (an Alerter). Here's an example showing the differences:

    package org.scalatest.examples.asyncfunsuite.note
    
    import collection.mutable import org.scalatest._
    class SetSuite extends funsuite.AsyncFunSuite {
    test("An element can be added to an empty mutable Set") {
    info("info is recorded") markup("markup is *also* recorded") note("notes are sent immediately") alert("alerts are also sent immediately")
    val set = mutable.Set.empty[String] set += "clarity" assert(set.size === 1) assert(set.contains("clarity")) } }

    Because note and alert information is sent immediately, it will appear before the test name in string reporters, and its color will be unrelated to the ultimate outcome of the test: note text will always appear in green, alert text will always appear in yellow. Here's an example:

    scala> org.scalatest.run(new SetSpec)
    SetSuite:
      + notes are sent immediately
      + alerts are also sent immediately
    - An element can be added to an empty mutable Set
      + info is recorded
      + markup is *also* recorded
    

    Another example is slowpoke notifications. If you find a test is taking a long time to complete, but you're not sure which test, you can enable slowpoke notifications. ScalaTest will use an Alerter to fire an event whenever a test has been running longer than a specified amount of time.

    In summary, use info and markup for text that should form part of the specification output. Use note and alert to send status notifications. (Because the HTML reporter is intended to produce a readable, printable specification, info and markup text will appear in the HTML report, but note and alert text will not.)

    Pending tests

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException.

    Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality, has not yet been implemented. Here's an example:

    package org.scalatest.examples.asyncfunsuite.pending
    
    import org.scalatest.funsuite.AsyncFunSuite import scala.concurrent.Future
    class AddSuite extends AsyncFunSuite {
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    test("addSoon will eventually compute a sum of passed Ints") (pending)
    def addNow(addends: Int*): Int = addends.sum
    test("addNow will immediately compute a sum of passed Ints") { val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

    (Note: "(pending)" is the body of the test. Thus the test contains just one statement, an invocation of the pending method, which throws TestPendingException.) If you run this version of AddSuite with:

    scala> org.scalatest.run(new AddSuite)
    

    It will run both tests, but report that first test is pending. You'll see:

    AddSuite:
    - addSoon will eventually compute a sum of passed Ints (pending)
    - addNow will immediately compute a sum of passed Ints
    

    One difference between an ignored test and a pending one is that an ignored test is intended to be used during significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

    One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException.

    Tagging tests

    An AsyncFunSuite's tests may be classified into groups by tagging them with string names. As with any suite, when executing an AsyncFunSuite, groups of tests can optionally be included and/or excluded. To tag an AsyncFunSuite's tests, you pass objects that extend class org.scalatest.Tag to methods that register tests. Class Tag takes one parameter, a string name. If you have created tag annotation interfaces as described in the Tag documentation, then you will probably want to use tag names on your test functions that match. To do so, simply pass the fully qualified names of the tag interfaces to the Tag constructor. For example, if you've defined a tag annotation interface with fully qualified name, com.mycompany.tags.DbTest, then you could create a matching tag for AsyncFunSuites like this:

    package org.scalatest.examples.asyncfunsuite.tagging
    
    import org.scalatest.Tag
    object DbTest extends Tag("com.mycompany.tags.DbTest")

    Given these definitions, you could place AsyncFunSuite tests into groups with tags like this:

    import org.scalatest.funsuite.AsyncFunSuite
    import org.scalatest.tagobjects.Slow
    import scala.concurrent.Future
    
    class AddSuite extends AsyncFunSuite {
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    test("addSoon will eventually compute a sum of passed Ints", Slow) { val futureSum: Future[Int] = addSoon(1, 2) // You can map assertions onto a Future, then return // the resulting Future[Assertion] to ScalaTest: futureSum map { sum => assert(sum == 3) } }
    def addNow(addends: Int*): Int = addends.sum
    test("addNow will immediately compute a sum of passed Ints", Slow, DbTest) {
    val sum: Int = addNow(1, 2) // You can also write synchronous tests. The body // must have result type Assertion: assert(sum == 3) } }

    This code marks both tests with the org.scalatest.tags.Slow tag, and the second test with the com.mycompany.tags.DbTest tag.

    The run method takes a Filter, whose constructor takes an optional Set[String] called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

    It is recommended, though not required, that you create a corresponding tag annotation when you create a Tag object. A tag annotation (on the JVM, not Scala.js) allows you to tag all the tests of an AsyncFunSuite in one stroke by annotating the class. For more information and examples, see the documentation for class Tag. On Scala.js, to tag all tests of a suite, you'll need to tag each test individually at the test site.

    Shared fixtures

    A test fixture is composed of the objects and other artifacts (files, sockets, database connections, etc.) tests use to do their work. When multiple tests need to work with the same fixtures, it is important to try and avoid duplicating the fixture code across those tests. The more code duplication you have in your tests, the greater drag the tests will have on refactoring the actual production code.

    ScalaTest recommends three techniques to eliminate such code duplication in async styles:

    • Refactor using Scala
    • Override withFixture
    • Mix in a before-and-after trait

    Each technique is geared towards helping you reduce code duplication without introducing instance vars, shared mutable objects, or other dependencies between tests. Eliminating shared mutable state across tests will make your test code easier to reason about and eliminate the need to synchronize access to shared mutable state on the JVM.

    The following sections describe these techniques, including explaining the recommended usage for each. But first, here's a table summarizing the options:

    Refactor using Scala when different tests need different fixtures.
    get-fixture methods The extract method refactor helps you create a fresh instances of mutable fixture objects in each test that needs them, but doesn't help you clean them up when you're done.
    loan-fixture methods Factor out dupicate code with the loan pattern when different tests need different fixtures that must be cleaned up afterwards.
    Override withFixture when most or all tests need the same fixture.
    withFixture(NoArgAsyncTest) The recommended default approach when most or all tests need the same fixture treatment. This general technique allows you, for example, to perform side effects at the beginning and end of all or most tests, transform the outcome of tests, retry tests, make decisions based on test names, tags, or other test data. Use this technique unless:
    Different tests need different fixtures (refactor using Scala instead)
    An exception in fixture code should abort the suite, not fail the test (use a before-and-after trait instead)
    You have objects to pass into tests (override withFixture(OneArgAsyncTest) instead)
    withFixture(OneArgAsyncTest) Use when you want to pass the same fixture object or objects as a parameter into all or most tests.
    Mix in a before-and-after trait when you want an aborted suite, not a failed test, if the fixture code fails.
    BeforeAndAfter Use this boilerplate-buster when you need to perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
    BeforeAndAfterEach Use when you want to stack traits that perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.

    Calling get-fixture methods

    If you need to create the same mutable fixture objects in multiple tests, and don't need to clean them up after using them, the simplest approach is to write one or more get-fixture methods. A get-fixture method returns a new instance of a needed fixture object (or a holder object containing multiple fixture objects) each time it is called. You can call a get-fixture method at the beginning of each test that needs the fixture, storing the returned object or objects in local variables. Here's an example:

    package org.scalatest.examples.asyncfunsuite.getfixture
    
    import org.scalatest.funsuite.AsyncFunSuite import collection.mutable.ListBuffer import scala.concurrent.Future
    class ExampleSuite extends AsyncFunSuite {
    def fixture: Future[String] = Future { "ScalaTest is " }
    test("Testing should be easy") { val future = fixture val result = future map { s => s + "easy!" } result map { s => assert(s === "ScalaTest is easy!") } }
    test("Testing should be fun") { val future = fixture val result = future map { s => s + "fun!" } result map { s => assert(s === "ScalaTest is fun!") } } }

    If you need to configure fixture objects differently in different tests, you can pass configuration into the get-fixture method. For example, you could pass in an initial value for a fixture object as a parameter to the get-fixture method.

    Overriding withFixture(NoArgAsyncTest)

    Although the get-fixture method approach takes care of setting up a fixture at the beginning of each test, it doesn't address the problem of cleaning up a fixture at the end of the test. If you just need to perform a side-effect at the beginning or end of a test, and don't need to actually pass any fixture objects into the test, you can override withFixture(NoArgAsyncTest), a method defined in trait AsyncTestSuite, a supertrait of AsyncFunSuite.

    Trait AsyncFunSuite's runTest method passes a no-arg async test function to withFixture(NoArgAsyncTest). It is withFixture's responsibility to invoke that test function. The default implementation of withFixture simply invokes the function and returns the result, like this:

    // Default implementation in trait AsyncTestSuite
    protected def withFixture(test: NoArgAsyncTest): FutureOutcome = {
      test()
    }
    

    You can, therefore, override withFixture to perform setup before invoking the test function, and/or perform cleanup after the test completes. The recommended way to ensure cleanup is performed after a test completes is to use the complete-lastly syntax, defined in supertrait CompleteLastly. The complete-lastly syntax will ensure that cleanup will occur whether future-producing code completes abruptly by throwing an exception, or returns normally yielding a future. In the latter case, complete-lastly will register the cleanup code to execute asynchronously when the future completes.

    The withFixture method is designed to be stacked, and to enable this, you should always call the super implementation of withFixture, and let it invoke the test function rather than invoking the test function directly. In other words, instead of writing “test()”, you should write “super.withFixture(test)”, like this:

    // Your implementation
    override def withFixture(test: NoArgAsyncTest) = {
    
    // Perform setup here
    complete { super.withFixture(test) // Invoke the test function } lastly { // Perform cleanup here } }

    If you have no cleanup to perform, you can write withFixture like this instead:

    // Your implementation
    override def withFixture(test: NoArgAsyncTest) = {
    
    // Perform setup here
    super.withFixture(test) // Invoke the test function }

    If you want to perform an action only for certain outcomes, you'll need to register code performing that action as a callback on the Future using one of Future's registration methods: onComplete, onSuccess, or onFailure. Note that if a test fails, that will be treated as a scala.util.Success(org.scalatest.Failed). So if you want to perform an action if a test fails, for example, you'd register the callback using onSuccess.

    Here's an example in which withFixture(NoArgAsyncTest) is used to take a snapshot of the working directory if a test fails, and send that information to the standard output stream:

    package org.scalatest.examples.asyncfunsuite.noargasynctest
    
    import java.io.File import org.scalatest._ import scala.concurrent.Future
    class ExampleSuite extends funsuite.AsyncFunSuite {
    override def withFixture(test: NoArgAsyncTest) = {
    super.withFixture(test) onFailedThen { _ => val currDir = new File(".") val fileNames = currDir.list() info("Dir snapshot: " + fileNames.mkString(", ")) } }
    def addSoon(addends: Int*): Future[Int] = Future { addends.sum }
    test("This test should succeed") { addSoon(1, 1) map { sum => assert(sum === 2) } }
    test("This test should fail") { addSoon(1, 1) map { sum => assert(sum === 3) } } }

    Running this version of ExampleSuite in the interpreter in a directory with two files, hello.txt and world.txt would give the following output:

    scala> org.scalatest.run(new ExampleSuite)
    ExampleSuite:
    - this test should succeed
    Dir snapshot: hello.txt, world.txt
    - this test should fail *** FAILED ***
      2 did not equal 3 (:33)
    

    Note that the NoArgAsyncTest passed to withFixture, in addition to an apply method that executes the test, also includes the test name and the config map passed to runTest. Thus you can also use the test name and configuration objects in your withFixture implementation.

    Lastly, if you want to transform the outcome in some way in withFixture, you'll need to use either the map or transform methods of Future, like this:

    // Your implementation
    override def withFixture(test: NoArgAsyncTest) = {
    
    // Perform setup here
    val futureOutcome = super.withFixture(test) // Invoke the test function
    futureOutcome change { outcome => // transform the outcome into a new outcome here } }

    Note that a NoArgAsyncTest's apply method will return a scala.util.Failure only if the test completes abruptly with a "test-fatal" exception (such as OutOfMemoryError) that should cause the suite to abort rather than the test to fail. Thus usually you would use map to transform future outcomes, not transform, so that such test-fatal exceptions pass through unchanged. The suite will abort asynchronously with any exception returned from NoArgAsyncTest's apply method in a scala.util.Failure.

    Calling loan-fixture methods

    If you need to both pass a fixture object into a test and perform cleanup at the end of the test, you'll need to use the loan pattern. If different tests need different fixtures that require cleanup, you can implement the loan pattern directly by writing loan-fixture methods. A loan-fixture method takes a function whose body forms part or all of a test's code. It creates a fixture, passes it to the test code by invoking the function, then cleans up the fixture after the function returns.

    The following example shows three tests that use two fixtures, a database and a file. Both require cleanup after, so each is provided via a loan-fixture method. (In this example, the database is simulated with a StringBuffer.)

    package org.scalatest.examples.asyncfunsuite.loanfixture
    
    import java.util.concurrent.ConcurrentHashMap
    import scala.concurrent.Future import scala.concurrent.ExecutionContext
    object DbServer { // Simulating a database server type Db = StringBuffer private final val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer // java.lang.StringBuffer is thread-safe databases.put(name, db) db } def removeDb(name: String): Unit = { databases.remove(name) } }
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    import org.scalatest._ import DbServer._ import java.util.UUID.randomUUID
    class ExampleSuite extends funsuite.AsyncFunSuite {
    def withDatabase(testCode: Future[Db] => Future[Assertion]) = { val dbName = randomUUID.toString // generate a unique db name val futureDb = Future { createDb(dbName) } // create the fixture complete { val futurePopulatedDb = futureDb map { db => db.append("ScalaTest is ") // perform setup } testCode(futurePopulatedDb) // "loan" the fixture to the test code } lastly { removeDb(dbName) // ensure the fixture will be cleaned up } }
    def withActor(testCode: StringActor => Future[Assertion]) = { val actor = new StringActor complete { actor ! Append("ScalaTest is ") // set up the fixture testCode(actor) // "loan" the fixture to the test code } lastly { actor ! Clear // ensure the fixture will be cleaned up } }
    // This test needs the actor fixture test("Testing should be productive") { withActor { actor => actor ! Append("productive!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is productive!") } } }
    // This test needs the database fixture test("Test code should be readable") { withDatabase { futureDb => futureDb map { db => db.append("readable!") assert(db.toString === "ScalaTest is readable!") } } }
    // This test needs both the actor and the database test("Test code should be clear and concise") { withDatabase { futureDb => withActor { actor => // loan-fixture methods compose actor ! Append("concise!") val futureString = actor ? GetValue val futurePair: Future[(Db, String)] = futureDb zip futureString futurePair map { case (db, s) => db.append("clear!") assert(db.toString === "ScalaTest is clear!") assert(s === "ScalaTest is concise!") } } } } }

    As demonstrated by the last test, loan-fixture methods compose. Not only do loan-fixture methods allow you to give each test the fixture it needs, they allow you to give a test multiple fixtures and clean everything up afterwards.

    Also demonstrated in this example is the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating databases, it is a good idea to give each database a unique name as is done in this example. This keeps tests completely isolated, allowing you to run them in parallel if desired.

    Overriding withFixture(OneArgTest)

    If all or most tests need the same fixture, you can avoid some of the boilerplate of the loan-fixture method approach by using a FixtureAsyncTestSuite and overriding withFixture(OneArgAsyncTest). Each test in a FixtureAsyncTestSuite takes a fixture as a parameter, allowing you to pass the fixture into the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a withFixture method that takes a OneArgAsyncTest. This withFixture method is responsible for invoking the one-arg async test function, so you can perform fixture set up before invoking and passing the fixture into the test function, and ensure clean up is performed after the test completes.

    To enable the stacking of traits that define withFixture(NoArgAsyncTest), it is a good idea to let withFixture(NoArgAsyncTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgAsyncTest to a NoArgAsyncTest. You can do that by passing the fixture object to the toNoArgAsyncTest method of OneArgAsyncTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgAsyncTest) method of the same instance by writing:

    withFixture(test.toNoArgAsyncTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.asyncfunsuite.oneargasynctest
    
    import org.scalatest._ import java.io._ import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    class ExampleSuite extends funsuite.FixtureAsyncFunSuite {
    type FixtureParam = StringActor
    def withFixture(test: OneArgAsyncTest): FutureOutcome = {
    val actor = new StringActor complete { actor ! Append("ScalaTest is ") // set up the fixture withFixture(test.toNoArgAsyncTest(actor)) } lastly { actor ! Clear // ensure the fixture will be cleaned up } }
    test("Testing should be easy") { actor => actor ! Append("easy!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is easy!") } }
    test("Testing should be fun") { actor => actor ! Append("fun!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is fun!") } } }

    In this example, the tests required one fixture object, a StringActor. If your tests need multiple fixture objects, you can simply define the FixtureParam type to be a tuple containing the objects or, alternatively, a case class containing the objects. For more information on the withFixture(OneArgAsyncTest) technique, see the documentation for FixtureAsyncFunSuite.

    Mixing in BeforeAndAfter

    In all the shared fixture examples shown so far, the activities of creating, setting up, and cleaning up the fixture objects have been performed during the test. This means that if an exception occurs during any of these activities, it will be reported as a test failure. Sometimes, however, you may want setup to happen before the test starts, and cleanup after the test has completed, so that if an exception occurs during setup or cleanup, the entire suite aborts and no more tests are attempted. The simplest way to accomplish this in ScalaTest is to mix in trait BeforeAndAfter. With this trait you can denote a bit of code to run before each test with before and/or after each test each test with after, like this:

    package org.scalatest.examples.asyncfunsuite.beforeandafter
    
    import org.scalatest.funsuite.AsyncFunSuite import org.scalatest.BeforeAndAfter import collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    class ExampleSuite extends AsyncFunSuite with BeforeAndAfter {
    final val actor = new StringActor
    before { actor ! Append("ScalaTest is ") // set up the fixture }
    after { actor ! Clear // clean up the fixture }
    test("testing should be easy") { actor ! Append("easy!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is easy!") } }
    test("testing should be fun") { actor ! Append("fun!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is fun!") } } }

    Note that the only way before and after code can communicate with test code is via some side-effecting mechanism, commonly by reassigning instance vars or by changing the state of mutable objects held from instance vals (as in this example). If using instance vars or mutable objects held from instance vals you wouldn't be able to run tests in parallel in the same instance of the test class (on the JVM, not Scala.js) unless you synchronized access to the shared, mutable state.

    Note that on the JVM, if you override ScalaTest's default serial execution context, you will likely need to worry about synchronizing access to shared mutable fixture state, because the execution context may assign different threads to process different Future transformations. Although access to mutable state along the same linear chain of Future transformations need not be synchronized, it can be difficult to spot cases where these constraints are violated. The best approach is to use only immutable objects when transforming Futures. When that's not practical, involve only thread-safe mutable objects, as is done in the above example. On Scala.js, by contrast, you need not worry about thread synchronization, because in effect only one thread exists.

    Although BeforeAndAfter provides a minimal-boilerplate way to execute code before and after tests, it isn't designed to enable stackable traits, because the order of execution would be non-obvious. If you want to factor out before and after code that is common to multiple test suites, you should use trait BeforeAndAfterEach instead, as shown later in the next section, composing fixtures by stacking traits.

    Composing fixtures by stacking traits

    In larger projects, teams often end up with several different fixtures that test classes need in different combinations, and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing withFixture methods in several traits, each of which call super.withFixture. Here's an example in which the StringBuilderActor and StringBufferActor fixtures used in the previous examples have been factored out into two stackable fixture traits named Builder and Buffer:

    package org.scalatest.examples.asyncfunsuite.composingwithasyncfixture
    
    import org.scalatest._ import org.scalatest.SuiteMixin import collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringBuilderActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    class StringBufferActor { private final val buf = ListBuffer.empty[String] def !(op: StringOp): Unit = synchronized { op match { case Append(value) => buf += value case Clear => buf.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[List[String]] = Future { synchronized { buf.toList } } }
    trait Builder extends AsyncTestSuiteMixin { this: AsyncTestSuite =>
    final val builderActor = new StringBuilderActor
    abstract override def withFixture(test: NoArgAsyncTest) = { builderActor ! Append("ScalaTest is ") complete { super.withFixture(test) // To be stackable, must call super.withFixture } lastly { builderActor ! Clear } } }
    trait Buffer extends AsyncTestSuiteMixin { this: AsyncTestSuite =>
    final val bufferActor = new StringBufferActor
    abstract override def withFixture(test: NoArgAsyncTest) = { complete { super.withFixture(test) // To be stackable, must call super.withFixture } lastly { bufferActor ! Clear } } }
    class ExampleSuite extends funsuite.AsyncFunSuite with Builder with Buffer {
    test("Testing should be easy") { builderActor ! Append("easy!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str === "ScalaTest is easy!") assert(lst.isEmpty) bufferActor ! Append("sweet") succeed } }
    test("Testing should be fun") { builderActor ! Append("fun!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str === "ScalaTest is fun!") assert(lst.isEmpty) bufferActor ! Append("awesome") succeed } } }

    By mixing in both the Builder and Buffer traits, ExampleSuite gets both fixtures, which will be initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution. In this case, Builder is “super” to Buffer. If you wanted Buffer to be “super” to Builder, you need only switch the order you mix them together, like this:

    class Example2Suite extends funsuite.AsyncFunSuite with Buffer with Builder
    

    If you only need one fixture you mix in only that trait:

    class Example3Suite extends funsuite.AsyncFunSuite with Builder
    

    Another way to create stackable fixture traits is by extending the BeforeAndAfterEach and/or BeforeAndAfterAll traits. BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp), and an afterEach method that will be run after (like JUnit's tearDown). Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests, and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it were rewritten to use the BeforeAndAfterEach methods instead of withFixture:

    package org.scalatest.examples.asyncfunsuite.composingbeforeandaftereach
    
    import org.scalatest._ import org.scalatest.BeforeAndAfterEach import collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringBuilderActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    class StringBufferActor { private final val buf = ListBuffer.empty[String] def !(op: StringOp): Unit = synchronized { op match { case Append(value) => buf += value case Clear => buf.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[List[String]] = Future { synchronized { buf.toList } } }
    trait Builder extends BeforeAndAfterEach { this: Suite =>
    final val builderActor = new StringBuilderActor
    override def beforeEach() { builderActor ! Append("ScalaTest is ") super.beforeEach() // To be stackable, must call super.beforeEach }
    override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally builderActor ! Clear } }
    trait Buffer extends BeforeAndAfterEach { this: Suite =>
    final val bufferActor = new StringBufferActor
    override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally bufferActor ! Clear } }
    class ExampleSuite extends funsuite.AsyncFunSuite with Builder with Buffer {
    test("Testing should be easy") { builderActor ! Append("easy!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str === "ScalaTest is easy!") assert(lst.isEmpty) bufferActor ! Append("sweet") succeed } }
    test("Testing should be fun") { builderActor ! Append("fun!") val futureString = builderActor ? GetValue val futureList = bufferActor ? GetValue val futurePair: Future[(String, List[String])] = futureString zip futureList futurePair map { case (str, lst) => assert(str === "ScalaTest is fun!") assert(lst.isEmpty) bufferActor ! Append("awesome") succeed } } }

    To get the same ordering as withFixture, place your super.beforeEach call at the end of each beforeEach method, and the super.afterEach call at the beginning of each afterEach method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the cleanup code is performed even if super.afterEach throws an exception.

    The difference between stacking traits that extend BeforeAndAfterEach versus traits that implement withFixture is that setup and cleanup code happens before and after the test in BeforeAndAfterEach, but at the beginning and end of the test in withFixture. Thus if a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the beforeEach or afterEach methods of BeforeAndAfterEach complete abruptly, it is considered an aborted suite, which will result in a SuiteAborted event.

    Shared tests

    Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in an AsyncFunSuite, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any AsyncFunSuite that uses them, so that the tests they contain will be registered as tests in that AsyncFunSuite. For example, given this StackActor class:

    package org.scalatest.examples.asyncfunsuite.sharedtests
    
    import scala.collection.mutable.ListBuffer import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Stack operations case class Push[T](value: T) sealed abstract class StackOp case object Pop extends StackOp case object Peek extends StackOp case object Size extends StackOp
    // Stack info case class StackInfo[T](top: Option[T], size: Int, max: Int) { require(size >= 0, "size was less than zero") require(max >= size, "max was less than size") val isFull: Boolean = size == max val isEmpty: Boolean = size == 0 }
    class StackActor[T](Max: Int, name: String) {
    private final val buf = new ListBuffer[T]
    def !(push: Push[T]): Unit = synchronized { if (buf.size != Max) buf.prepend(push.value) else throw new IllegalStateException("can't push onto a full stack") }
    def ?(op: StackOp)(implicit c: ExecutionContext): Future[StackInfo[T]] = synchronized { op match { case Pop => if (buf.size != 0) Future { StackInfo(Some(buf.remove(0)), buf.size, Max) } else throw new IllegalStateException("can't pop an empty stack") case Peek => if (buf.size != 0) Future { StackInfo(Some(buf(0)), buf.size, Max) } else throw new IllegalStateException("can't peek an empty stack") case Size => Future { StackInfo(None, buf.size, Max) } } }
    override def toString: String = name }

    You may want to test the stack represented by the StackActor class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your AsyncFunSuite for StackActor, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures.

    You can define a behavior function that encapsulates these shared tests inside the AsyncFunSuite that uses them. If they are shared between different AsyncFunSuites, however, you could also define them in a separate trait that is mixed into each AsyncFunSuite that uses them. For example, here the nonEmptyStackActor behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

    import org.scalatest.funsuite.AsyncFunSuite
    
    trait AsyncFunSuiteStackBehaviors { this: AsyncFunSuite =>
    def nonEmptyStackActor(createNonEmptyStackActor: => StackActor[Int], lastItemAdded: Int, name: String): Unit = {
    test("Size is fired at non-empty stack actor: " + name) { val stackActor = createNonEmptyStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(!stackInfo.isEmpty) } }
    test("Peek is fired at non-empty stack actor: " + name) { val stackActor = createNonEmptyStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePeek <- stackActor ? Size afterPeek <- stackActor ? Peek } yield (beforePeek, afterPeek) futurePair map { case (beforePeek, afterPeek) => assert(afterPeek.top === Some(lastItemAdded)) assert(afterPeek.size === beforePeek.size) } }
    test("Pop is fired at non-empty stack actor: " + name) { val stackActor = createNonEmptyStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePop <- stackActor ? Size afterPop <- stackActor ? Pop } yield (beforePop, afterPop) futurePair map { case (beforePop, afterPop) => assert(afterPop.top === Some(lastItemAdded)) assert(afterPop.size === beforePop.size - 1) } } }
    def nonFullStackActor(createNonFullStackActor: => StackActor[Int], name: String): Unit = {
    test("non-full stack actor is not full: " + name) { val stackActor = createNonFullStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(!stackInfo.isFull) } }
    test("Push is fired at non-full stack actor: " + name) { val stackActor = createNonFullStackActor val futurePair: Future[(StackInfo[Int], StackInfo[Int])] = for { beforePush <- stackActor ? Size afterPush <- { stackActor ! Push(7); stackActor ? Peek } } yield (beforePush, afterPush) futurePair map { case (beforePush, afterPush) => assert(afterPush.top === Some(7)) assert(afterPush.size === beforePush.size + 1) } } } }

    Given these behavior functions, you could invoke them directly, but AsyncFunSuite offers a DSL for the purpose, which looks like this:

    testsFor(nonEmptyStackActor(almostEmptyStackActor, LastValuePushed, almostEmptyStackActorName))
    testsFor(nonFullStackActor(almostEmptyStackActor, almostEmptyStackActorName))
    

    Here's an example:

    class StackSuite extends AsyncFunSuite with AsyncFunSuiteStackBehaviors {
    
    val Max = 10 val LastValuePushed = Max - 1
    // Stack fixture creation methods val emptyStackActorName = "empty stack actor" def emptyStackActor = new StackActor[Int](Max, emptyStackActorName )
    val fullStackActorName = "full stack actor" def fullStackActor = { val stackActor = new StackActor[Int](Max, fullStackActorName ) for (i <- 0 until Max) stackActor ! Push(i) stackActor }
    val almostEmptyStackActorName = "almost empty stack actor" def almostEmptyStackActor = { val stackActor = new StackActor[Int](Max, almostEmptyStackActorName ) stackActor ! Push(LastValuePushed) stackActor }
    val almostFullStackActorName = "almost full stack actor" def almostFullStackActor = { val stackActor = new StackActor[Int](Max, almostFullStackActorName) for (i <- 1 to LastValuePushed) stackActor ! Push(i) stackActor }
    test("an empty stack actor is empty") { val stackActor = emptyStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(stackInfo.isEmpty) } }
    test("Peek is fired at an empty stack actor") { recoverToSucceededIf[IllegalStateException] { emptyStackActor ? Peek } }
    test("Pop is fired at an empty stack actor") { recoverToSucceededIf[IllegalStateException] { emptyStackActor ? Pop } }
    testsFor(nonEmptyStackActor(almostEmptyStackActor, LastValuePushed, almostEmptyStackActorName)) testsFor(nonFullStackActor(almostEmptyStackActor, almostEmptyStackActorName))
    testsFor(nonEmptyStackActor(almostFullStackActor, LastValuePushed, almostFullStackActorName)) testsFor(nonFullStackActor(almostFullStackActor, almostFullStackActorName))
    test("a full stack actor is full") { val stackActor = fullStackActor val futureStackInfo = stackActor ? Size futureStackInfo map { stackInfo => assert(stackInfo.isFull) } }
    testsFor(nonEmptyStackActor(fullStackActor, LastValuePushed, fullStackActorName))
    test("Push is fired at a full stack actor") { val stackActor = fullStackActor assertThrows[IllegalStateException] { stackActor ! Push(10) } } }

    If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

    scala> org.scalatest.run(new StackSuite)
    StackSuite:
    StackSuite:
    - an empty stack actor is empty
    - Peek is fired at an empty stack actor
    - Pop is fired at an empty stack actor
    - Size is fired at non-empty stack actor: almost empty stack actor
    - Peek is fired at non-empty stack actor: almost empty stack actor
    - Pop is fired at non-empty stack actor: almost empty stack actor
    - non-full stack actor is not full: almost empty stack actor
    - Push is fired at non-full stack actor: almost empty stack actor
    - Size is fired at non-empty stack actor: almost full stack actor
    - Peek is fired at non-empty stack actor: almost full stack actor
    - Pop is fired at non-empty stack actor: almost full stack actor
    - non-full stack actor is not full: almost full stack actor
    - Push is fired at non-full stack actor: almost full stack actor
    - a full stack actor is full
    - Size is fired at non-empty stack actor: full stack actor
    - Peek is fired at non-empty stack actor: full stack actor
    - Pop is fired at non-empty stack actor: full stack actor
    - Push is fired at a full stack actor
    

    One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. In a AsyncFunSuite there is no nesting construct analogous to AsyncFunSpec's describe clause. Therefore, you need to do a bit of extra work to ensure that the test names are unique. If a duplicate test name problem shows up in an AsyncFunSuite, you'll need to pass in a prefix or suffix string to add to each test name. You can call toString on the shared fixture object, or pass this string the same way you pass any other data needed by the shared tests. This is the approach taken by the previous AsyncFunSuiteStackBehaviors example.

    Given this AsyncFunSuiteStackBehaviors trait, calling it with the stackWithOneItem fixture, like this:

    testsFor(nonEmptyStackActor(almostFullStackActor, LastValuePushed, almostFullStackActorName))
    

    yields test names:

    • Size is fired at non-empty stack actor: almost empty stack actor
    • Peek is fired at non-empty stack actor: almost empty stack actor
    • Pop is fired at non-empty stack actor: almost empty stack actor

    Whereas calling it with the stackWithOneItemLessThanCapacity fixture, like this:

    testsFor(nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed))
    

    yields different test names:

    • Size is fired at non-empty stack actor: almost full stack actor
    • Peek is fired at non-empty stack actor: almost full stack actor
    • Pop is fired at non-empty stack actor: almost full stack actor
  4. trait AsyncFunSuiteLike extends AsyncTestSuite with AsyncTestRegistration with Informing with Notifying with Alerting with Documenting

    Implementation trait for class AsyncFunSuite, which represents a suite of tests in which each test is represented as a function value.

    Implementation trait for class AsyncFunSuite, which represents a suite of tests in which each test is represented as a function value.

    AsyncFunSuite is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of AsyncFunSuite into some other class, you can use this trait instead, because class AsyncFunSuite does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of AsyncFunSuite.

  5. abstract class FixtureAnyFunSuite extends FixtureAnyFunSuiteLike

    A sister class to org.scalatest.funsuite.AnyFunSuite that can pass a fixture object into its tests.

    A sister class to org.scalatest.funsuite.AnyFunSuite that can pass a fixture object into its tests.

    Recommended Usage: Use class FixtureAnyFunSuite in situations for which AnyFunSuite would be a good choice, when all or most tests need the same fixture objects that must be cleaned up afterwards. Note: FixtureAnyFunSuite is intended for use in special situations, with class AnyFunSuite used for general needs. For more insight into where FixtureAnyFunSuite fits in the big picture, see the withFixture(OneArgTest) subsection of the Shared fixtures section in the documentation for class AnyFunSuite.

    Class FixtureAnyFunSuite behaves similarly to class org.scalatest.funsuite.AnyFunSuite, except that tests may have a fixture parameter. The type of the fixture parameter is defined by the abstract FixtureParam type, which is a member of this class. This class also contains an abstract withFixture method. This withFixture method takes a OneArgTest, which is a nested trait defined as a member of this class. OneArgTest has an apply method that takes a FixtureParam. This apply method is responsible for running a test. This class's runTest method delegates the actual running of each test to withFixture(OneArgTest), passing in the test code to run via the OneArgTest argument. The withFixture(OneArgTest) method (abstract in this class) is responsible for creating the fixture argument and passing it to the test function.

    Subclasses of this class must, therefore, do three things differently from a plain old org.scalatest.funsuite.AnyFunSuite:

    • define the type of the fixture parameter by specifying type FixtureParam
    • define the withFixture(OneArgTest) method
    • write tests that take a fixture parameter
    • (You can also define tests that don't take a fixture parameter.)

    If the fixture you want to pass into your tests consists of multiple objects, you will need to combine them into one object to use this class. One good approach to passing multiple fixture objects is to encapsulate them in a case class. Here's an example:

    case class FixtureParam(file: File, writer: FileWriter)
    

    To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let withFixture(NoArgTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing the fixture object to the toNoArgTest method of OneArgTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:

    withFixture(test.toNoArgTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.funsuite.oneargtest
    
    import org.scalatest.funsuite import java.io._
    class ExampleSuite extends funsuite.FixtureAnyFunSuite {
    case class FixtureParam(file: File, writer: FileWriter)
    def withFixture(test: OneArgTest) = {
    // create the fixture val file = File.createTempFile("hello", "world") val writer = new FileWriter(file) val theFixture = FixtureParam(file, writer)
    try { writer.write("ScalaTest is ") // set up the fixture withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test } finally writer.close() // clean up the fixture }
    test("testing should be easy") { f => f.writer.write("easy!") f.writer.flush() assert(f.file.length === 18) }
    test("testing should be fun") { f => f.writer.write("fun!") f.writer.flush() assert(f.file.length === 17) } }

    If a test fails, the OneArgTest function will result in a Failed wrapping the exception describing the failure. To ensure clean up happens even if a test fails, you should invoke the test function from inside a try block and do the cleanup in a finally clause, as shown in the previous example.

    Sharing fixtures across classes

    If multiple test classes need the same fixture, you can define the FixtureParam and withFixture(OneArgTest) implementations in a trait, then mix that trait into the test classes that need it. For example, if your application requires a database and your integration tests use that database, you will likely have many test classes that need a database fixture. You can create a "database fixture" trait that creates a database with a unique name, passes the connector into the test, then removes the database once the test completes. This is shown in the following example:

    package org.scalatest.examples.fixture.funsuite.sharing
    
    import java.util.concurrent.ConcurrentHashMap import org.scalatest.funsuite import DbServer._ import java.util.UUID.randomUUID
    object DbServer { // Simulating a database server type Db = StringBuffer private val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer databases.put(name, db) db } def removeDb(name: String) { databases.remove(name) } }
    trait DbFixture { this: FixtureSuite =>
    type FixtureParam = Db
    // Allow clients to populate the database after // it is created def populateDb(db: Db) {}
    def withFixture(test: OneArgTest) = { val dbName = randomUUID.toString val db = createDb(dbName) // create the fixture try { populateDb(db) // setup the fixture withFixture(test.toNoArgTest(db)) // "loan" the fixture to the test } finally removeDb(dbName) // clean up the fixture } }
    class ExampleSuite extends funsuite.FixtureAnyFunSuite with DbFixture {
    override def populateDb(db: Db) { // setup the fixture db.append("ScalaTest is ") }
    test("testing should be easy") { db => db.append("easy!") assert(db.toString === "ScalaTest is easy!") }
    test("testing should be fun") { db => db.append("fun!") assert(db.toString === "ScalaTest is fun!") }
    // This test doesn't need a Db test("test code should be clear") { () => val buf = new StringBuffer buf.append("ScalaTest code is ") buf.append("clear!") assert(buf.toString === "ScalaTest code is clear!") } }

    Often when you create fixtures in a trait like DbFixture, you'll still need to enable individual test classes to "setup" a newly created fixture before it gets passed into the tests. A good way to accomplish this is to pass the newly created fixture into a setup method, like populateDb in the previous example, before passing it to the test function. Classes that need to perform such setup can override the method, as does ExampleSuite.

    If a test doesn't need the fixture, you can indicate that by providing a no-arg instead of a one-arg function, as is done in the third test in the previous example, “test code should be clear”. In other words, instead of starting your function literal with something like “db =>”, you'd start it with “() =>”. For such tests, runTest will not invoke withFixture(OneArgTest). It will instead directly invoke withFixture(NoArgTest).

    Both examples shown above demonstrate the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in these examples. This keeps tests completely isolated, allowing you to run them in parallel if desired. You could mix ParallelTestExecution into either of these ExampleSuite classes, and the tests would run in parallel just fine.

  6. trait FixtureAnyFunSuiteLike extends FixtureTestSuite with FixtureTestRegistration with Informing with Notifying with Alerting with Documenting

    Implementation trait for class FixtureAnyFunSuite, which is a sister class to org.scalatest.funsuite.AnyFunSuite that can pass a fixture object into its tests.

    Implementation trait for class FixtureAnyFunSuite, which is a sister class to org.scalatest.funsuite.AnyFunSuite that can pass a fixture object into its tests.

    FixtureAnyFunSuite is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of FixtureAnyFunSuite into some other class, you can use this trait instead, because class FixtureAnyFunSuite does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of FixtureAnyFunSuite.

  7. trait FixtureAsyncFunSuite extends FixtureAsyncFunSuiteLike with Informing with Notifying with Alerting with Documenting

    A sister class to org.scalatest.funsuite.AsyncFunSuite that can pass a fixture object into its tests.

    A sister class to org.scalatest.funsuite.AsyncFunSuite that can pass a fixture object into its tests.

    Recommended Usage: Use class FixtureAsyncFunSuite in situations for which AsyncFunSuite would be a good choice, when all or most tests need the same fixture objects that must be cleaned up afterwards. Note: FixtureAsyncFunSuite is intended for use in special situations, with class AsyncFunSuite used for general needs. For more insight into where FixtureAsyncFunSuite fits in the big picture, see the withFixture(OneArgAsyncTest) subsection of the Shared fixtures section in the documentation for class AsyncFunSuite.

    Class FixtureAsyncFunSuite behaves similarly to class org.scalatest.funsuite.AsyncFunSuite, except that tests may have a fixture parameter. The type of the fixture parameter is defined by the abstract FixtureParam type, which is a member of this class. This class also contains an abstract withFixture method. This withFixture method takes a OneArgAsyncTest, which is a nested trait defined as a member of this class. OneArgAsyncTest has an apply method that takes a FixtureParam. This apply method is responsible for running a test. This class's runTest method delegates the actual running of each test to withFixture(OneArgAsyncTest), passing in the test code to run via the OneArgAsyncTest argument. The withFixture(OneArgAsyncTest) method (abstract in this class) is responsible for creating the fixture argument and passing it to the test function.

    Subclasses of this class must, therefore, do three things differently from a plain old org.scalatest.funsuite.AsyncFunSuite:

    • define the type of the fixture parameter by specifying type FixtureParam
    • define the withFixture(OneArgAsyncTest) method
    • write tests that take a fixture parameter
    • (You can also define tests that don't take a fixture parameter.)

    If the fixture you want to pass into your tests consists of multiple objects, you will need to combine them into one object to use this class. One good approach to passing multiple fixture objects is to encapsulate them in a case class. Here's an example:

    case class FixtureParam(file: File, writer: FileWriter)
    

    To enable the stacking of traits that define withFixture(NoArgAsyncTest), it is a good idea to let withFixture(NoArgAsyncTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgAsyncTest to a NoArgAsyncTest. You can do that by passing the fixture object to the toNoArgAsyncTest method of OneArgAsyncTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgAsyncTest) method of the same instance by writing:

    withFixture(test.toNoArgAsyncTest(theFixture))
    

    Here's a complete example:

    package org.scalatest.examples.asyncfunsuite.oneargasynctest
    
    import org.scalatest._ import java.io._ import scala.concurrent.Future import scala.concurrent.ExecutionContext
    // Defining actor messages sealed abstract class StringOp case object Clear extends StringOp case class Append(value: String) extends StringOp case object GetValue
    class StringActor { // Simulating an actor private final val sb = new StringBuilder def !(op: StringOp): Unit = synchronized { op match { case Append(value) => sb.append(value) case Clear => sb.clear() } } def ?(get: GetValue.type)(implicit c: ExecutionContext): Future[String] = Future { synchronized { sb.toString } } }
    class ExampleSuite extends funsuite.FixtureAsyncFunSuite {
    type FixtureParam = StringActor
    def withFixture(test: OneArgAsyncTest): FutureOutcome = {
    val actor = new StringActor complete { actor ! Append("ScalaTest is ") // set up the fixture withFixture(test.toNoArgAsyncTest(actor)) } lastly { actor ! Clear // ensure the fixture will be cleaned up } }
    test("Testing should be easy") { actor => actor ! Append("easy!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is easy!") } }
    test("Testing should be fun") { actor => actor ! Append("fun!") val futureString = actor ? GetValue futureString map { s => assert(s === "ScalaTest is fun!") } } }

    If a test fails, the future returned by the OneArgAsyncTest function will result in an org.scalatest.Failed wrapping the exception describing the failure. To ensure clean up happens even if a test fails, you should invoke the test function and do the cleanup using complete-lastly, as shown in the previous example. The complete-lastly syntax, defined in CompleteLastly, which is extended by AsyncTestSuite, ensures the second, cleanup block of code is executed, whether the the first block throws an exception or returns a future. If it returns a future, the cleanup will be executed when the future completes.

    Sharing fixtures across classes

    If multiple test classes need the same fixture, you can define the FixtureParam and withFixture(OneArgAsyncTest) implementations in a trait, then mix that trait into the test classes that need it. For example, if your application requires a database and your integration tests use that database, you will likely have many test classes that need a database fixture. You can create a "database fixture" trait that creates a database with a unique name, passes the connector into the test, then removes the database once the test completes. This is shown in the following example:

    package org.scalatest.examples.fixture.asyncfunsuite.sharing
    
    import java.util.concurrent.ConcurrentHashMap import org.scalatest._ import DbServer._ import java.util.UUID.randomUUID import scala.concurrent.Future
    object DbServer { // Simulating a database server type Db = StringBuffer private val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer databases.put(name, db) db } def removeDb(name: String) { databases.remove(name) } }
    trait DbFixture { this: FixtureAsyncTestSuite =>
    type FixtureParam = Db
    // Allow clients to populate the database after // it is created def populateDb(db: Db) {}
    def withFixture(test: OneArgAsyncTest): FutureOutcome = { val dbName = randomUUID.toString val db = createDb(dbName) // create the fixture complete { populateDb(db) // setup the fixture withFixture(test.toNoArgAsyncTest(db)) // "loan" the fixture to the test } lastly { removeDb(dbName) // ensure the fixture will be cleaned up } } }
    class ExampleSuite extends funsuite.FixtureAsyncFunSuite with DbFixture {
    override def populateDb(db: Db) { // setup the fixture db.append("ScalaTest is ") }
    test("testing should be easy") { db => Future { db.append("easy!") assert(db.toString === "ScalaTest is easy!") } }
    test("testing should be fun") { db => Future { db.append("fun!") assert(db.toString === "ScalaTest is fun!") } }
    // This test doesn't need a Db test("test code should be clear") { () => Future { val buf = new StringBuffer buf.append("ScalaTest code is ") buf.append("clear!") assert(buf.toString === "ScalaTest code is clear!") } } }

    Often when you create fixtures in a trait like DbFixture, you'll still need to enable individual test classes to "setup" a newly created fixture before it gets passed into the tests. A good way to accomplish this is to pass the newly created fixture into a setup method, like populateDb in the previous example, before passing it to the test function. Classes that need to perform such setup can override the method, as does ExampleSuite.

    If a test doesn't need the fixture, you can indicate that by providing a no-arg instead of a one-arg function, as is done in the third test in the previous example, “test code should be clear”. In other words, instead of starting your function literal with something like “db =>”, you'd start it with “() =>”. For such tests, runTest will not invoke withFixture(OneArgAsyncTest). It will instead directly invoke withFixture(NoArgAsyncTest).

    Both examples shown above demonstrate the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in these examples. This keeps tests completely isolated, allowing you to run them in parallel if desired. You could mix ParallelTestExecution into either of these ExampleSuite classes, and the tests would run in parallel just fine.

  8. trait FixtureAsyncFunSuiteLike extends FixtureAsyncTestSuite with FixtureAsyncTestRegistration with Informing with Notifying with Alerting with Documenting

    Implementation trait for class FixtureAsyncFunSuite, which is a sister class to org.scalatest.funsuite.AsyncFunSuite that can pass a fixture object into its tests.

    Implementation trait for class FixtureAsyncFunSuite, which is a sister class to org.scalatest.funsuite.AsyncFunSuite that can pass a fixture object into its tests.

    FixtureAsyncFunSuite is a class, not a trait, to minimize compile time given there is a slight compiler overhead to mixing in traits compared to extending classes. If you need to mix the behavior of FixtureAsyncFunSuite into some other class, you can use this trait instead, because class FixtureAsyncFunSuite does nothing more than extend this trait and add a nice toString implementation.

    See the documentation of the class for a detailed overview of FixtureAsyncFunSuite.

Inherited from AnyRef

Inherited from Any

Ungrouped