org.scalatest.concurrent

Futures

trait Futures extends PatienceConfiguration

Trait that facilitates testing with futures.

This trait defines a FutureConcept trait that can be used to implicitly wrap different kinds of futures, thereby providing a uniform testing API for futures. The three ways this trait enables you to test futures are:

1. Invoking isReadyWithin, to assert that a future is ready within a a specified time period. Here's an example:

assert(result.isReadyWithin(100 millis))

2. Invoking futureValue, to obtain a futures result within a specified or implicit time period, like this:

assert(result.futureValue === 7)

3. Passing the future to whenReady, and performing assertions on the result value passed to the given function, as in:

whenReady(result) { s =>
  s should be ("hello")
}

The whenReady construct periodically inspects the passed future, until it is either ready or the configured timeout has been surpassed. If the future becomes ready before the timeout, whenReady passes the future's value to the specified function.

To make whenReady more broadly applicable, the type of future it accepts is a FutureConcept[T], where T is the type of value promised by the future. Passing a future to whenReady requires an implicit conversion from the type of future you wish to pass (the modeled type) to FutureConcept[T]. Subtrait JavaFutures provides an implicit conversion from java.util.concurrent.Future[T] to FutureConcept[T].

For example, the following invocation of whenReady would succeed (not throw an exception):

import org.scalatest._
import matchers.ShouldMatchers._
import concurrent.Futures._
import java.util.concurrent._

val exec = Executors.newSingleThreadExecutor val task = new Callable[String] { def call() = { Thread.sleep(50); "hi" } } whenReady(exec.submit(task)) { s => s should be ("hi") }

However, because the default timeout is 150 milliseconds, the following invocation of whenReady would ultimately produce a TestFailedException:

val task = new Callable[String] { def call() = { Thread.sleep(500); "hi" } }
whenReady(exec.submit(task)) { s =>
  s should be ("hi")
}

Assuming the default configuration parameters, a timeout of 150 milliseconds and an interval of 15 milliseconds, were passed implicitly to whenReady, the detail message of the thrown TestFailedException would look like:

The future passed to whenReady was never ready, so whenReady timed out. Queried 95 times, sleeping 10 milliseconds between each query.

Configuration of whenReady

The whenReady methods of this trait can be flexibly configured. The two configuration parameters for whenReady along with their default values and meanings are described in the following table:

Configuration Parameter Default Value Meaning
timeout scaled(150 milliseconds) the maximum amount of time to allow unsuccessful queries before giving up and throwing TestFailedException
interval scaled(15 milliseconds) the amount of time to sleep between each query

The default values of both timeout and interval are passed to the scaled method, inherited from ScaledTimeSpans, so that the defaults can be scaled up or down together with other scaled time spans. See the documentation for trait ScaledTimeSpans for more information.

The whenReady methods of trait Futures each take a PatienceConfig object as an implicit parameter. This object provides values for the two configuration parameters. Trait Futures provides an implicit val named defaultPatience with each configuration parameter set to its default value. If you want to set one or more configuration parameters to a different value for all invocations of whenReady in a suite you can override this val (or hide it, for example, if you are importing the members of the Futures companion object rather than mixing in the trait). For example, if you always want the default timeout to be 2 seconds and the default interval to be 5 milliseconds, you can override defaultPatience, like this:

implicit override val defaultPatience =
  PatienceConfig(timeout = Span(2, Seconds), interval = Span(5, Millis))

Or, hide it by declaring a variable of the same name in whatever scope you want the changed values to be in effect:

implicit val defaultPatience =
  PatienceConfig(timeout =  Span(2, Seconds), interval = Span(5, Millis))

In addition to taking a PatienceConfig object as an implicit parameter, the whenReady methods of trait Futures include overloaded forms that take one or two PatienceConfigParam objects that you can use to override the values provided by the implicit PatienceConfig for a single whenReady invocation. For example, if you want to set timeout to 6 seconds for just one particular whenReady invocation, you can do so like this:

whenReady (exec.submit(task), timeout(Span(6, Seconds))) { s =>
  s should be ("hi")
}

This invocation of eventually will use 6000 for timeout and whatever value is specified by the implicitly passed PatienceConfig object for the interval configuration parameter. If you want to set both configuration parameters in this way, just list them separated by commas:

whenReady (exec.submit(task), timeout(Span(6, Seconds)), interval(Span(500, Millis))) { s =>
  s should be ("hi")
}

You can also import or mix in the members of SpanSugar if you want a more concise DSL for expressing time spans:

whenReady (exec.submit(task), timeout(6 seconds), interval(500 millis)) { s =>
  s should be ("hi")
}

Note: The whenReady construct was in part inspired by the whenDelivered matcher of the BlueEyes project, a lightweight, asynchronous web framework for Scala.

Source
Futures.scala
Linear Supertypes
Known Subclasses
Ordering
  1. Alphabetic
  2. By inheritance
Inherited
  1. Futures
  2. PatienceConfiguration
  3. AbstractPatienceConfiguration
  4. ScaledTimeSpans
  5. AnyRef
  6. Any
  1. Hide All
  2. Show all
Learn more about member selection
Visibility
  1. Public
  2. All

Type Members

  1. trait FutureConcept[T] extends AnyRef

    Concept trait for futures, instances of which are passed to the whenReady methods of trait Futures.

  2. final case class PatienceConfig(timeout: Span = ..., interval: Span = ...) extends Product with Serializable

    Configuration object for asynchronous constructs, such as those provided by traits Eventually and AsyncAssertions.

Value Members

  1. final def !=(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  2. final def !=(arg0: Any): Boolean

    Definition Classes
    Any
  3. final def ##(): Int

    Definition Classes
    AnyRef → Any
  4. final def ==(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  5. final def ==(arg0: Any): Boolean

    Definition Classes
    Any
  6. final def asInstanceOf[T0]: T0

    Definition Classes
    Any
  7. def clone(): AnyRef

    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws()
  8. final def eq(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  9. def equals(arg0: Any): Boolean

    Definition Classes
    AnyRef → Any
  10. def finalize(): Unit

    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws()
  11. final def getClass(): Class[_]

    Definition Classes
    AnyRef → Any
  12. def hashCode(): Int

    Definition Classes
    AnyRef → Any
  13. def interval(value: Span): Interval

    Returns an Interval configuration parameter containing the passed value, which specifies the amount of time to sleep after a retry.

    Returns an Interval configuration parameter containing the passed value, which specifies the amount of time to sleep after a retry.

    Definition Classes
    PatienceConfiguration
  14. final def isInstanceOf[T0]: Boolean

    Definition Classes
    Any
  15. final def ne(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  16. final def notify(): Unit

    Definition Classes
    AnyRef
  17. final def notifyAll(): Unit

    Definition Classes
    AnyRef
  18. implicit def patienceConfig: PatienceConfig

    Implicit PatienceConfig value providing default configuration values.

    Implicit PatienceConfig value providing default configuration values.

    To change the default configuration, override or hide this def with another implicit PatienceConfig containing your desired default configuration values.

    Definition Classes
    PatienceConfigurationAbstractPatienceConfiguration
  19. final def scaled(span: Span): Span

    Scales the passed Span by the Double factor returned by spanScaleFactor.

    Scales the passed Span by the Double factor returned by spanScaleFactor.

    The Span is scaled by invoking its scaledBy method, thus this method has the same behavior: The value returned by spanScaleFactor can be any positive number or zero, including a fractional number. A number greater than one will scale the Span up to a larger value. A fractional number will scale it down to a smaller value. A factor of 1.0 will cause the exact same Span to be returned. A factor of zero will cause Span.ZeroLength to be returned. If overflow occurs, Span.Max will be returned. If underflow occurs, Span.ZeroLength will be returned.

    Definition Classes
    ScaledTimeSpans
    Exceptions thrown
    IllegalArgumentException

    if the value returned from spanScaleFactor is less than zero

  20. def spanScaleFactor: Double

    The factor by which the scaled method will scale Spans.

    The factor by which the scaled method will scale Spans.

    The default implementation of this method will return the span scale factor that was specified for the run, or 1.0 if no factor was specified. For example, you can specify a span scale factor when invoking ScalaTest via the command line by passing a -F argument to Runner.

    Definition Classes
    ScaledTimeSpans
  21. final def synchronized[T0](arg0: ⇒ T0): T0

    Definition Classes
    AnyRef
  22. def timeout(value: Span): Timeout

    Returns a Timeout configuration parameter containing the passed value, which specifies the maximum amount to wait for an asynchronous operation to complete.

    Returns a Timeout configuration parameter containing the passed value, which specifies the maximum amount to wait for an asynchronous operation to complete.

    Definition Classes
    PatienceConfiguration
  23. def toString(): String

    Definition Classes
    AnyRef → Any
  24. final def wait(): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws()
  25. final def wait(arg0: Long, arg1: Int): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws()
  26. final def wait(arg0: Long): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws()
  27. final def whenReady[T, U](future: FutureConcept[T])(fun: (T) ⇒ U)(implicit config: PatienceConfig): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful attempts before giving up is configured by the timeout field of the PatienceConfig passed implicitly as the last parameter. The interval to sleep between attempts is configured by the interval field of the PatienceConfig passed implicitly as the last parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

  28. final def whenReady[T, U](future: FutureConcept[T], interval: Interval)(fun: (T) ⇒ U)(implicit config: PatienceConfig): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful attempts before giving up is configured by the timeout field of the PatienceConfig passed implicitly as the last parameter. The interval to sleep between attempts is configured by the value contained in the passed interval parameter.

    future

    the future to query

    interval

    the Interval configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

  29. final def whenReady[T, U](future: FutureConcept[T], timeout: Timeout)(fun: (T) ⇒ U)(implicit config: PatienceConfig): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time in milliseconds to tolerate unsuccessful queries before giving up and throwing TestFailedException is configured by the value contained in the passed timeout parameter. The interval to sleep between attempts is configured by the interval field of the PatienceConfig passed implicitly as the last parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    timeout

    the Timeout configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

  30. final def whenReady[T, U](future: FutureConcept[T], timeout: Timeout, interval: Interval)(fun: (T) ⇒ U)(implicit config: PatienceConfig): U

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    Queries the passed future repeatedly until it either is ready, or a configured maximum amount of time has passed, sleeping a configured interval between attempts; and when ready, passes the future's value to the passed function.

    The maximum amount of time to tolerate unsuccessful queries before giving up and throwing TestFailedException is configured by the value contained in the passed timeout parameter. The interval to sleep between attempts is configured by the value contained in the passed interval parameter.

    If the eitherValue method of the underlying Scala future returns a scala.Some containing a scala.util.Failure containing a java.util.concurrent.ExecutionException, and this exception contains a non-null cause, that cause will be included in the TestFailedException as its cause. The ExecutionException will be be included as the TestFailedException's cause only if the ExecutionException's cause is null.

    future

    the future to query

    timeout

    the Timeout configuration parameter

    interval

    the Interval configuration parameter

    fun

    the function to which pass the future's value when it is ready

    config

    an PatienceConfig object containing timeout and interval parameters that are unused by this method

    returns

    the result of invoking the fun parameter

Inherited from PatienceConfiguration

Inherited from ScaledTimeSpans

Inherited from AnyRef

Inherited from Any

Ungrouped